List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Recycling of Greenhouse Gases to Fuels & Chemicals

    SBC: Skyre, Inc.            Topic: D

    "Technologies that prevent Greenhouse Gas (GHG) emission from natural and man-made sources are needed to address the environmental and human health implications of climate change. One approach is to capture the GHG emissions and secure them in long term storage, i.e., carbon sequestration. However, current carbon sequestration technologies may: A) produce undesirable by products; B) contamina ...

    SBIR Phase I 2011 Environmental Protection Agency
  2. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Industrial Flue Gas Cleanup using DFC Technology

    SBC: FuelCell Energy, Inc.            Topic: D

    "The increasing atmospheric concentrations of carbon dioxide and nitrous oxides has been linked to climate change, which has a myriad of environmental and human health implications. In response to this growing concern, FuelCell Energy (FCE) has developed novel system concepts for separation of Carbon dioxide from greenhouse gas (GHG) emission sources, using Direct FuelCell® (DFC®) technology. ...

    SBIR Phase I 2011 Environmental Protection Agency
  4. Phased array three-dimensional beam steering system for millimeter wave sources emitting in the 100-300 GHz region

    SBC: Phase Sensitive Innovations, Inc.            Topic: A11006

    Herein, we propose a novel approach to achieving a broadband, phased-array transmitter operating at frequencies from 100-300 GHz. Our approach is based on the concept of optically distributing a pair of locked optical tones to an array of antenna coupled photomixers. Lightweight optical fibers enable the distribution of these optical tones to any arbitrary antenna array geometry with antenna pla ...

    SBIR Phase I 2011 Department of DefenseArmy
  5. LSPR Nanostructures for SERS

    SBC: REAL-TIME ANALYZERS, INCORPORATED            Topic: A11019

    The overall goal of this proposed program (through Phase III) is to develop a chemical warfare agent analyzer capable of detecting vapor phase agents at 10-7g/m3 in less than 1 minute. This will be accomplished by developing a method to produce novel localized surface plasmon resonance (LSPR) nanostructures, supported by theory, that produce a minimum surface-enhanced Raman scattering (SERS) enha ...

    SBIR Phase I 2011 Department of DefenseArmy
  6. Safe High Rate and Ultra High Capacity with Minimum 4.0 Amp. hour 18650 lithium ion rechargeable cell

    SBC: Yardney Technical Products, Inc.            Topic: A11024

    This proposal addresses the Army"s need for rechargeable 18650-type lithium-ion cells with specific energy greater than 300 Wh/kg for Land Warrior applications. The proposed cells will allow a Soldier to drastically extend the mission run time and reduce the frequency of changing the batteries. The improvements in specific energy will be achieved by radical enhancements of the cell"s chemistry and ...

    SBIR Phase I 2011 Department of DefenseArmy
  7. High-Strength, Lightweight Metal Matrix Composites (MMC) Material for Bridge Applications

    SBC: M CUBED TECHNOLOGIES, INC.            Topic: A11063

    The Army is in need of an improved material for use in bridge structures. Key requirements are reduced weight relative to current metallic structures (steel and aluminum), high strength, resistance to catastrophic failure, attractive cost, and resistance to environmental factors (weather, corrosion, erosion, extreme temperatures, UV, etc.). To meet this need, the use of macro-composite structure ...

    SBIR Phase I 2011 Department of DefenseArmy
  8. Lithium ion battery separator development

    SBC: Yardney Technical Products, Inc.            Topic: A11065

    The objective of this project is to develop low cost composite microporous polyethylene based separator with oxidation-resistant and high permeability. Manufactured separators will be characterized for its physical, mechanical, electrochemical properties, performance, wettability, thickness, porosity. The new separators will be studied in lithium ion cells, optimized and qualified for better chara ...

    SBIR Phase I 2011 Department of DefenseArmy
  9. Small Diesel Engine for Modular Power

    SBC: D-Star Engineering Corporation            Topic: A11068

    The project aims to engage in design, modeling and simulation of a heavy fuel engine that meets the specific needs of the Army (300 500 Watts of rated mechanical power). Phase 1 tasks include definition of an engine that can meet the power needs, parametric design of the engine, engine modeling, variational performance analysis & optimization, prediction of engine performance, optimization of the ...

    SBIR Phase I 2011 Department of DefenseArmy
  10. A Handheld Sensor for Amorphous Coating Integrity Evaluation

    SBC: ALPHASENSE, INC.            Topic: SB093002

    In the current SBIR program, AlphaSense aimed at developing a novel, handheld, non-destructive sensor to evaluate the integrity of Naval Advanced Amorphous Coatings (NAAC) in real time. In phase I, we have proven the feasibility of using the cavity perturbation technique to detect different types of defects present in thermal-sprayed testing coupons. Specifically, we optimized the sensor probe des ...

    SBIR Phase II 2011 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government