For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 2-D Ultrasound Scanning Probes for 3-D Medical Diagnostic Imaging

    SBC: Guided Therapy Systems, Inc.            Topic: N/A


    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  2. A Low-Toxicity, Non-Pyrotechnic, High Yield Visible Smoke Material

    SBC: Ventana Research Corporation            Topic: A17059

    Novel, non-pyrotechnic white smoke formulations will be developed during this effort.Upon aerosolization, these polymers will react with both ambient moisture and nitrogen present in air; producing smoke exhibiting significant obscuring power within visible and NIR spectral regimes.

    SBIR Phase I 2018 Department of DefenseArmy
  3. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. A Simplified Model of Gas Generator for Active Component Control and Operability Analysis

    SBC: Scientific Monitoring, Inc.            Topic: N/A

    The firm proposes to conduct a research on turboshaft engine control and accessory technologies. The specific technology to be developed a simplified, unsteady-flow dynamic model of an engine gas generator which is suitable for the analysis and design of advanced turbine engine controls. Two motivations of the proposed work are: 1) a lack of efficient model to support the design and simulation o ...

    SBIR Phase I 1996 Department of DefenseArmy
  5. Actuation for Compressor Surge Allevation and Stall Line Management

    SBC: Scientific Monitoring, Inc.            Topic: N/A

    Control systems that stabilize the operation of a compressor around the surge line have been demonstrated in controlled laboratory conditions on fixed speed compressors. Jet engine manufacturers are considering this technology for improving engine performance and operability by reducing the compressor surge margins that are currently built into engine control logic. To demonstrate this technolog ...

    SBIR Phase I 1996 Department of DefenseArmy
  6. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Advanced Materials for Ultralight PEM Fuel Cell Applications

    SBC: ATS-MER, LLC            Topic: N/A

    It is proposed to demonstrate the applicability of advancement materials, that has been developed for aerospace and military applications, to fuel cell technology to lower cost, increase performance, and decrease weight for future man-portable power systems. MER's advanced C-C composites will be investigated as bipolar plates to decrease weight, increase mechanical integrity, decrease resistivity ...

    SBIR Phase II 1996 Department of DefenseArmy
  8. Advanced Model/Rule Based Software for Affordable Engine Control

    SBC: Scientific Monitoring, Inc.            Topic: N/A

    The firm proposes to develop an advanced software capability for the control and monitoring of turbine engines. This effort is aimed at the near-term deployment of ensuing technologies on a low-cost helicopter engine. The effort will be embedded in the T800 engine commercialization project led by the Allison Engine Company. The reasons for the high cost of engine controls are two fold: first, r ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  9. Air Platform Passive Occupant Protection

    SBC: SAFE INC            Topic: A18001

    Body flailing during a severe helicopter crash can lead to injury or death when the head and upper torso strike rigid objects within the flail envelope.Currently fielded restraint systems allow a large flail envelope because the strap routing and anchor positions require some body motion to occur before the straps can develop significant reaction loads.Safe, Inc. (Safe) is proposing an alternate d ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Biometrics-at-a-distance


    VAWD is proud to submit this proposal to explore a new sensor development potentially capable of precise determination of Potential Threat Elements (PTE) identified by Polarimetric STTW radar systems. Current STTW radar has demonstrated the ability to detect persons through obstructions at operational relevant ranges. Although the systems have proven the ability to capture differentiating characte ...

    SBIR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government