For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A New Generation Virtual Reality Individual Portal


    We propose to build an energy extractive Individual Portal (I-Port) to the virtual world enabling the user to traverse a large virtual workspace in a very small real space. Using a commercial exercise treadmill, this device will improve virtual training, health maintenance and evaluation, and have a large market for education, recreation, and adversarial gaming. A motion capture, energy extracti ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  2. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. A Proposal to Develop an Automatic, Microfabricated Polymer Bilayer Air-Fluid Sampling Inlet

    SBC: Bomec, Inc.            Topic: N/A

    A critical component of a biochemical sensor system for detection and analysis of airborne pathogens are mechanisms for automated acquisition and transport of an air sample from the sensor inlet to the analysis chamber. While considerable capability already exists for sampling and handling of macroscopic volumes of gas, formidable technological challenges needed to be overcome before microfabrica ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  4. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Advanced Ground Vehicle Propulsion Technology- High Temperature Tribological Considerations



    SBIR Phase I 1996 Department of DefenseArmy
  6. An Innovative Microwave Applicator for Paint Stripping

    SBC: MJR Scientific            Topic: N/A

    An effective removal of paint from many surfaces can result in increased safety and reduced maintenance cost for many systems. The ideal paint stripping system should; 1) easily strip paint from various structures, 2) allow safe operation and safe removal of paint hazardous by-products (e.g. lead paint dust), 3) not damage the surface, and 4) by simple and reliable for manual and automated operati ...

    SBIR Phase I 1996 Department of DefenseArmy
  7. Automated Tuning and Calibration of By-Wire Vehicles for Automated Driving Functions

    SBC: Autonomous Solutions, Inc.            Topic: A16134

    Unmanned ground vehicles are becoming widely seen as a means of increasing safety and production for a variety of purposes. These vehicles are used in a diverse range of applications (e.g. military, mining, agriculture, automotive). Many control parameters scale nicely with the size and type of vehicle. However, performance requirements also vary based on accuracy and smoothness of control per cus ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. Cellulose Based Soil Medium As a Pect Moss Substitute

    SBC: Wabash Valley Products, Inc.            Topic: N/A


    SBIR Phase I 1996 Environmental Protection Agency
  9. Controllable Solid-State Pump for Missile Propulsion Systems

    SBC: Technical research Associates, Inc.            Topic: N/A

    New tactical missiles may require on-demand thrust control utilizing liquid propellent systems. the objective of this project is to develop a small, highly controllable, low cost. electrically driven high pressure liquid fuel pump to be used for tactical missile propulsion sustems. Phase I will investigate the feasibility of a novel solid-state pump technology. The device will operate at very h ...

    SBIR Phase I 1996 Department of DefenseArmy
  10. Development of a Modular, Open-Architecture, Integrated, and Validated Mobility Prediction Capability

    SBC: Advanced Science And Automation Corp            Topic: A18105

    The objective of this project is to develop a modular, open-architecture, physics-based ground vehicle mobility prediction software tool for world-wide terrains that are encountered in military applications including on-road and off-road soft soil terrains. The tool will integrate three modules: (1) Physics-Based Vehicle-Terrain Modeling tool; (2) Geographic Information System (GIS); and (3) Stoch ...

    SBIR Phase I 2018 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government