List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Novel Remediation Technique for PFAS contaminated Soil and Sediment

    SBC: QMetry Corporation            Topic: 17NCER3A

    Both chemicals Perfluorooctane Sulfonate (PFOS) and Perfluorooctanoic Acid (PFOA) are very persistent, toxic, and bio-accumulate in the environment and human body. PFAS can end up in soil from multiple sources, often mixed with other pollutants. Because of their unique lipid- and water-repellent characteristics, PFOS and PFOA are used as surface-active agents in various high-temperature applicatio ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Semantic Plan to Inform Digital Representation (SPIDR)

    SBC: Tier 1 Performance Solutions, LLC            Topic: A17055

    Army mission planning is complex and entails coordination across echelons in a dynamic environment. There is a significant opportunity to mitigate the complexity with new decision aiding systems. Chief among the challenges is designing a decision aiding system that appropriately represents the many planning artifacts, both digital and analog, as well as updating and integrating the dynamic entitie ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. ON BOARD OXYGEN GENERATING MEMBRANES FOR REDUCED START-UP EMISSIONS

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Automobile three-way catalyst (TWC) are quite efficient at steady state operatingtemperature typically destroying 98% of incoming hydrocarbons (HCs) and carbonmonoxide (CO). However, up to 80% of emissions occur during the first fewminutes of Federal Test Procedure when the engine is running rich, the engine iscold and TWC has not reached light-off temperature. To significantly reduce HCsand CO ...

    SBIR Phase II 1996 Environmental Protection Agency
  7. Reduction of NOX from Diesel Engines Using Nitrogen Enriched Air

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  8. Fully Automated, High Performance SAW Microsensor Array for Mobile Air Sampling and Chemical Monitoring

    SBC: Microsensor Systems Inc.            Topic: N/A

    The collection of sufficient quantities of truly representative ambient samples (e.g., air, water) for analysis is a serious problem with any mobile air sampling and monitoring system. There are several ways this problem can be addressed. The approach proposed in tihs SBIR is twofold. First, a chemical detector with very high sensitivity and selectivity will be designed to reduce the volume of sam ...

    SBIR Phase II 1996 Department of DefenseDefense Advanced Research Projects Agency
  9. Development of the Sensor Coating Materials and Application Techniques Necessary for On-Chip Chemical Analysis Using Solid-State Chemical

    SBC: Microsensor Systems Inc.            Topic: N/A

    Many of the solid-state chemical microsensors, including surface acoustic wave (SAW) devices and the organic or inorganic semiconductors, are ideally suited as sensors for on-chip chemical analysis systems as they are inherently very small, low power and readily manufactured by photolithographic techniques. The major technical problems associated with the development of integrated chemical micros ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government