You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Small form-factor, Relocatable, Unattended Ground Sensor

    SBC: NEXTGEN FEDERAL SYSTEMS LLC            Topic: A18022

    Intelligent Multirotor Autonomous Glider for Relocatable Sensors (IMAGRS) is an innovative and highly capable micro Unmanned Aircraft System (UAS) that enables unattended multi-spectral imaging and processing. IMAGRS integrates existing technologies into a micro, hybrid, transforming UAS which acts autonomously as a relocatable imaging sensor. The hybrid design of IMAGRS will enable the platform t ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Dual-Voltage Lithium-Ion 6T Batteries for Low-voltage and High-voltage Applications

    SBC: SPEAR POWER SYSTEMS, INC            Topic: A18096

    Spear Power Systems will leverage their strong experience developing advanced lithium-ion battery systems and robust battery management systems for defense and industrial programs to research and evaluate viable lithium-ion cell technologies and emerging power-dense semiconductor switch technologies to support an innovative dual-voltage lithium-ion 6T concept design. During Phase I, Spear will mak ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. ON BOARD OXYGEN GENERATING MEMBRANES FOR REDUCED START-UP EMISSIONS

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Automobile three-way catalyst (TWC) are quite efficient at steady state operatingtemperature typically destroying 98% of incoming hydrocarbons (HCs) and carbonmonoxide (CO). However, up to 80% of emissions occur during the first fewminutes of Federal Test Procedure when the engine is running rich, the engine iscold and TWC has not reached light-off temperature. To significantly reduce HCsand CO ...

    SBIR Phase II 1996 Environmental Protection Agency
  7. Reduction of NOX from Diesel Engines Using Nitrogen Enriched Air

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  8. Signal Amplification of Nonextractive Immunoassay

    SBC: Fayette Environmental Services, Inc            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  9. Interaction Between Computer Models of Face and Mask

    SBC: General Engineering and Systems Analysis Co Inc (GESAC)            Topic: N/A

    Fit and comfort are so important to ensure a proper operation of a mask and so any new mask design has to be tested on a large number of volunteers. As the Army strives to become more representative of the American population in its gender and racial content, it is also possible that some part of the Army population may not be afforded adequate protection with masks of one standard size of any d ...

    SBIR Phase I 1996 Department of DefenseArmy
  10. Fiber Optics in Filament Wound Structures

    SBC: PRODUCTION PRODUCTS MANUFACTURING & SALES CO., INC.            Topic: N/A

    Production Products will develop novel, low cost processing technology to incorporate fiber optic sensors in filament wound composite rocket motor cases, pressure vessels, and other missile components. The fiber optic sensors will be used for cure monitoring, measuring temperature, displacement, strain, and structural health monitoring. In Phase I we will develop low cost techniques to place the ...

    SBIR Phase I 1996 Department of DefenseArmy
US Flag An Official Website of the United States Government