You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Waterproofing Cargo Airdrop Equipment

    SBC: RESODYN CORPORATION            Topic: A16114

    The U.S. Army is interested in the development of innovative coating technologies to allow current U.S. Army airdrop related hardware and equipment to survive fresh and salt water operations with increased reliability and without damage and significant maintenance impact. Resodyn Corporation proposes for development a durable, moisture-impermeable, thermoplastic coating material to address the U.S ...

    SBIR Phase II 2018 Department of DefenseArmy
  2. Reduction of NOX from Diesel Engines Using Nitrogen Enriched Air

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  3. ON BOARD OXYGEN GENERATING MEMBRANES FOR REDUCED START-UP EMISSIONS

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Automobile three-way catalyst (TWC) are quite efficient at steady state operatingtemperature typically destroying 98% of incoming hydrocarbons (HCs) and carbonmonoxide (CO). However, up to 80% of emissions occur during the first fewminutes of Federal Test Procedure when the engine is running rich, the engine iscold and TWC has not reached light-off temperature. To significantly reduce HCsand CO ...

    SBIR Phase II 1996 Environmental Protection Agency
  4. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Drone-Based Gas Mapping LiDAR for Leak Mitigation

    SBC: Bridger Photonics, Inc.            Topic: 17NCER2C

    Bridger Photonics, Inc. proposes developing a drone-based Gas Mapping LiDAR™ sensor to mitigate the loss of valuable product across the Oil & Gas supply chain.The sensor will uncover leaks and physical changes to infrastructure and pipeline right-of-ways using high-resolution 3D topographical imagery with methane gas concentration overlays.The technology will enable reliable detection, precise l ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  7. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government