List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Replacements for PVC and PE Water Pipes

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER1C

    METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Intercalated Carbon Microfibers for Broadband Visible-IR Obscuration

    SBC: Applied Sciences            Topic: A16046

    Smokes and obscurants play a crucial role in protecting the Warfighter by decreasing the electromagnetic energy available for the function of enemy sensors, seekers, trackers, optical enhancement devices and the human eye. Numerical modeling predicts that order of magnitude increases over current performance levels are possible if high aspect-ratio, highly conductive particles can be effectively d ...

    SBIR Phase II 2018 Department of DefenseArmy
  5. Narrowband Perfect Absorber for Infrared Sensing

    SBC: Srico Inc            Topic: A12aT023

    Under this subsequent SBIR Phase II proposal, SRICO combines metamaterial narrowband absorbers and proprietary thin film pyroelectric thermal detectors to produce ultra low size, weight, power and cost (SWAP-C) room temperature stand-off chemical sensors. Spectrally and aperture selective metamaterial absorption suppresses blackbody radiation and enables the room temperature pyroelectric sensor to ...

    SBIR Phase II 2018 Department of DefenseArmy
  6. Lightweight Bullet and Fragment Impact Protection for Mobile Missile Launcher

    SBC: AMERICAN TECHNICAL COATINGS, INC.            Topic: A17034

    Army mobile missile launchers are vulnerable to bullet and fragment impacts as current missile canisters are made of lightweight metals or composites that offer little ballistic protection.American Technical Coatings, Inc. (DBA ATC Materials, Inc.) of Westlake, OH is a leader in insensitive munitions armor technologies and has previously commercialized and fielded systems for IM protection.ATCs li ...

    SBIR Phase II 2018 Department of DefenseArmy
  7. Flying Missile Rail and High-Rate Production

    SBC: Cornerstone Research Group, Incorporated            Topic: SB173005

    CRG proposes to leverage its partnerships, advanced aerospace system design capabilities, and unique manufacturing technologies to design, build and demonstrate a flying missile rail along with the high-rate production technologies required to meet DARPAs objectives of 500 units per month, within one month.CRG will focus on high-rate manufacturing technologies currently in use within the automotiv ...

    SBIR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  8. Additional Tasks of Opportunity for Evaluation of the Impact of Beam Control for OpticalPhased Array Transceivers for Laser Power Beaming Enhancement (LPBE)

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: AF10BT23

    The Laser Power Beaming Enhancement (LPBE) will develop a new system for providing stand-off, wireless power transmission to remote UAV's and other moving platforms. A power generation facility directs a beam from a coherently combined fiber-laser array ...

    SBIR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  9. Flexible Conformal Ultrasound Arrays for Imaging and Modulation

    SBC: PRIXARC, LLC            Topic: SB173001

    This project will address the need for reliable and robust wearable ultrasound system for both imaging and modulation in challenging environments such as ambulances, emergency rooms, battlefields, and industrial facilities by using the concept of autonomy. Specifically, we will develop autonomous wearable systems that integrate ultrasound imaging and modulation subsystems within a single cognitive ...

    SBIR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  10. Load Bearing Thermal Protection Structure for Hypersonic Flight

    SBC: Powdermet, Inc.            Topic: SB171013

    Hypersonic weapons and vehicle systems require high temperature structures to resist aerothermal loads.Load bearing thermal protection systems can reduce size and weight by 50% or more over traditional parasitic thermal protection systems, such as the tiles used on the space shuttle.This SBIR program will complete the design, scale-up, and validation of multifunctional metallic TPS systems fabrica ...

    SBIR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government