Award Data

Investment castings have well served both the military and commercial markets in such areas as waveguides and splitters for microwave applications, and for connectors, housings, heat sinks and mechanical parts for electronics, optical, instrumentation, and medical devices. Tomorrow's higher RF millimeter wave and communications electronics products, and more compact optical, instrumentation and m ...

Automobile three-way catalyst (TWC) are quite efficient at steady state operatingtemperature typically destroying 98% of incoming hydrocarbons (HCs) and carbonmonoxide (CO). However, up to 80% of emissions occur during the first fewminutes of Federal Test Procedure when the engine is running rich, the engine iscold and TWC has not reached light-off temperature. To significantly reduce HCsand CO ...

N/A

N/A

N/A

A novel method for preparing carbon electrode structures having applications in electrochemical double layer capacitors (EDLCs) is described. The method for preparing these structures employs carbon (graphite) nano fiber materials and results in an electrode having both high surface area and high electronic conductivity; two essential characteristics for EDLC electrodes. The fabrication process ...

N/A

Cathodes in proton exchange membrane fuel cells (PEMFCs) that run on hydrogen are coated with a thin layer of conductive ionomer- The ionomer facilitates proton conduction to the costly platinum group metal (PGM) catalyst in the cathode, where oxygen reduction and reaction to form water occurs- Higher catalyst efficiency and lower catalyst loadings are desirable for industry PEMFC cost reductions- ...

C4 olefins are important petroleum refinery and petrochemical plant products- They are used in a variety of downstream processes, such as the production of alkylate fuel for gasoline- About 65 million metric tons of alkylate fuel is produced globally from C4 olefins- Other downstream products are secondary butyl alcohol, maleic anhydride, and butylene oxide, butyl rubber, and methyl methacrylate, ...

Xergy and RPI will develop a novel composite membrane that enables electrochemical hydrogen compression at > 1 kg/hour at 875 bar with an energy consumption of 1.4 kWh/kg, given hydrogen input at 100 bar. Phase I of this research will include synthesis of membrane samples, followed by bench-top evaluation of key performance characteristics, including polarization curves, Tafel plots, and evaluatio ...