You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    GPS Disciplined Oscillator (GPSDO) systems traditionally combine the 1PPS output from a GPS receiver and highly stable clock like a Chip Scale Atomic Clock (CSAC) to steer the local clock frequency to match the frequency and phase of the GPS-generated 1PPS. However, the GPS receiver does not take advantage of the stable Chip Scale Atomic Clock for improved GPS receiver resilience, improved positio ...

    SBIR Phase II 2018 Department of DefenseArmy
  2. ON BOARD OXYGEN GENERATING MEMBRANES FOR REDUCED START-UP EMISSIONS

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Automobile three-way catalyst (TWC) are quite efficient at steady state operatingtemperature typically destroying 98% of incoming hydrocarbons (HCs) and carbonmonoxide (CO). However, up to 80% of emissions occur during the first fewminutes of Federal Test Procedure when the engine is running rich, the engine iscold and TWC has not reached light-off temperature. To significantly reduce HCsand CO ...

    SBIR Phase II 1996 Environmental Protection Agency
  3. In-Situ Electronic Sensors to Determine Analytes in Cold-Region Soils

    SBC: Phionics, Inc.            Topic: N/A

    The primary problem to be addressed by this SBIR request is the need for development of specific ion sensors that can work reliably in sub-freezing environments to allow unmanned dataloggers to accumulate data on a down-loaded or real-time basis. This would involve re-designing the reference side of the electrode (half-cell) to be rugged enough to survive the conditions imposed upon it while also ...

    SBIR Phase II 1996 Department of DefenseArmy
  4. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    Legacy GPS receivers do not make use of the disciplined atomic oscillator flywheel output in GPS Disciplined Oscillator systems. The attached proposal shows how the disciplined oscillator signal can be used to improve GPS carrier and code tracking, mitigate multipath, jamming and spoofing, and to detect GPS receiver and satellite system anomalies. Using the disciplined oscillator as the frequency ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  8. Non-Pyro Electric Small Arms Fire Simulator

    SBC: Digital Solid State Propulsion, Inc            Topic: A18091

    Digital Solid State Propulsion Inc. is proposing the development of a reusable electric blank system that leverages over 10 years of success in formulating, engineering, and manufacturing Electric Solid Propellants for the space, defense, and entertainment industries. DSSP already has a pyrotechnic solution to battlefield effects simulating small arms fire based on eSquib technology, however, for ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. High Surface Area Carbon Electrodes for Electrochemical Double Layer Capacitors

    SBC: EVANS CAPACITOR COMPANY            Topic: N/A

    A novel method for preparing carbon electrode structures having applications in electrochemical double layer capacitors (EDLCs) is described. The method for preparing these structures employs carbon (graphite) nano fiber materials and results in an electrode having both high surface area and high electronic conductivity; two essential characteristics for EDLC electrodes. The fabrication process ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. Miniaturized Cast Metal Integrated Components

    SBC: American Industrial Casting,            Topic: N/A

    Investment castings have well served both the military and commercial markets in such areas as waveguides and splitters for microwave applications, and for connectors, housings, heat sinks and mechanical parts for electronics, optical, instrumentation, and medical devices. Tomorrow's higher RF millimeter wave and communications electronics products, and more compact optical, instrumentation and m ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government