List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Treatment of Produced Water from Coal-Bed Methane Production Using Carbon Aerogel Technology

    SBC: Bpf, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  2. ON BOARD OXYGEN GENERATING MEMBRANES FOR REDUCED START-UP EMISSIONS

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Automobile three-way catalyst (TWC) are quite efficient at steady state operatingtemperature typically destroying 98% of incoming hydrocarbons (HCs) and carbonmonoxide (CO). However, up to 80% of emissions occur during the first fewminutes of Federal Test Procedure when the engine is running rich, the engine iscold and TWC has not reached light-off temperature. To significantly reduce HCsand CO ...

    SBIR Phase II 1996 Environmental Protection Agency
  3. Reduction of NOX from Diesel Engines Using Nitrogen Enriched Air

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  4. Self Contained Electrochemical System for Treating Paint Residue

    SBC: Lynntech Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  5. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. Special Architecture to Break Speed Barriers in Real-Time Applications for Automatic Target Recognition

    SBC: 3D-Computing, Inc.            Topic: N/A

    The 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...

    SBIR Phase I 1996 Department of DefenseArmy
  7. Embedded Optical Fiber Sensors in Solid Rocket Motor Cases

    SBC: Astro Technology Inc.            Topic: N/A

    This research project will investigate the use of optical-fiber sensors within a solid rocket motor case. THese sensors will be multi-functional and possess the ability to measure displacement (or strain) and temperature. They will be capable of embedment "in-site" or can be bonded to the exterior of motors that have already been manufactured. If successful, the effect of forces exerted on the ...

    SBIR Phase I 1996 Department of DefenseArmy
  8. Artificial Intelligence and Visual Techniques for Course of Action (COA) Development and Analysis

    SBC: AUSTIN INFO SYSTEMS, INC.            Topic: N/A

    The objective of this project is to establish the technical foundation for, and the feasibility of, a tactical decision aid that can be used by a commander and staff to develop and analyze courses of action (COA). This project will combine object-oriented and distributed computing technologies into an integrated system architecture and design. Successful techniques from artificial intelligence r ...

    SBIR Phase I 1996 Department of DefenseArmy
  9. Aerospace Ceramics and Bone

    SBC: BIOMEDICAL ENTERPRISES, INC.            Topic: N/A

    BioMedical Enterprises, Inc. (BME) and NASA Ames Research Center (NASA ARC) are developing NASA's aerospace insulation materials for use as an osseous scaffolding to facilitate and support bone wound healing and regeneration. Fibrous reusable composite insulation (FRCI) developed by NASA for use on the space shuttle was modified to promote bone ingrowth and will be evaluated for its ability to fo ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. A Low-Cost Miniature Active Radar Frequency Package (AFRP)

    SBC: Carrell Associates, Inc.            Topic: N/A

    This SBIR Phase I program will test the feasibility of achieving a high effective radar cross section over extremely wide bandwidth in a small, low-cost, RF repeater module, using a retrodirective array of a very small repeaters. The array factors effectively multiply the RF characteristics of a single channel to realize high array gain and power using low-performance amplifier. An integral goal ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government