List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. ON BOARD OXYGEN GENERATING MEMBRANES FOR REDUCED START-UP EMISSIONS

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Automobile three-way catalyst (TWC) are quite efficient at steady state operatingtemperature typically destroying 98% of incoming hydrocarbons (HCs) and carbonmonoxide (CO). However, up to 80% of emissions occur during the first fewminutes of Federal Test Procedure when the engine is running rich, the engine iscold and TWC has not reached light-off temperature. To significantly reduce HCsand CO ...

    SBIR Phase II 1996 Environmental Protection Agency
  5. Reduction of NOX from Diesel Engines Using Nitrogen Enriched Air

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  6. FAILURE INVESTIGATION OF CERAMIC ARMOR BACKED BY ALUMINUM OR ALUMINUM MATRIX COMPOSITE SUPPORT-PLATES

    SBC: Lanxide Corporation            Topic: N/A

    IT IS PROPOSED THAT THE BALLISTIC PERFORMANCE OF TIB2 CERMAIC ARMOR TILES BACKED UP BY A VARIETY OF LIGHTWEIGHT SUPPORT-PLATES BE INVESTIGATED BY 1MEV FLASH X-RAY EQUIPMENT DURING PENETRATION, AND BY MACROSCOPIC AND MICROSCOPIC OBSERVATIONS OF RECOVERED TARGETS. THE SUPPORT-PLATE TEST MATRIX INCLUDES TWO MATERIALS (A STRUCTURAL ALUMINUM ALLOY AND A CERAMIC REINFORCED ALUMINUM MATRIX COMPOSITE), TW ...

    SBIR Phase I 1991 Department of DefenseDefense Advanced Research Projects Agency
  7. INVESTIGATION OF STRESS WAVES AND FAILURE PHENOMENOLOGY IN ALUMINUM METAL MATRIX COMPOSITE AND TIB2 LAMINATED ARMOR

    SBC: Lanxide Corporation            Topic: N/A

    TO UNDERSTAND BETTER HOW LAMINATED CERAMIC ARMOR PERFORMS, IT IS PROPOSED TO INVESTIGATE THE EFFECT OF THE IMPEDANCE MISMATCH AND INTERLAYER BOND STRENGTH (BETWEEN AI(2)0(3) REINFORCED ALUMINUM MATRIX COMPOSITES AND TIB(2)) ON STRESS WAVE PROPAGATION AND PENETRATION PHENOMENOLOGY DUE TO LONG ROD IMPACT. LANXIDE'S UNIQUE PROCESSING TECHNOLOGIES WILL BE USED TO FORM A STRONG METALLURGICAL BOND AT TH ...

    SBIR Phase I 1991 Department of DefenseDefense Advanced Research Projects Agency
  8. NOVEL CERAMIC/METAL COMPOSITES FOR ARMOR APPLICATIONS

    SBC: Lanxide Corporation            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government