List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Small Scale Ethanol Drying

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    This program exceeded all key milestones. Using cellulose Waste, CMS demonstrated novel ethanol drying membranes via small scale dephlegmation process that yields fuel grade ethanol (FGE) at a lower cost than large switch grass ethanol plants. This success yields positive value for cellulose waste. We achieved targeted EPA goals of developing low cost environmentally friendly systems to enhance re ...

    SBIR Phase II 2008 Environmental Protection Agency
  2. Small Scale Ethanol Drying

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: 07NCERP1

    This program exceeded all key milestones. Using cellulose Waste, CMS demonstrated novel ethanol drying membranes via small scale dephlegmation process that yields fuel grade ethanol (FGE) at a lower cost than large switch grass ethanol plants. This success yields positive value for cellulose waste. We achieved targeted EPA goals of developing low cost environmentally friendly systems to enhance re ...

    SBIR Phase II 2008 Environmental Protection Agency
  3. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Generating Autoclave-Level Mechanical Properties with Out-of-Autoclave Thermoplastic Placement of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: T702

    Out-of-autoclave thermoplastic tape/tow placement (TP-ATP) is nearing commercialization but suffers a moderate gap in mechanical properties compared with laminates fabricated via thermoset autoclave processing. Out-of-autoclave thermoplastic processing significantly lowers composite aerospace part costs, but the property gap must be closed. This STTR program, endorsed herein by Boeing and Cytec ...

    STTR Phase I 2008 National Aeronautics and Space Administration
  5. Accelerated Numerical Processing API Based on GPU Technology

    SBC: EM PHOTONICS INC            Topic: S802

    The recent performance increases in graphics processing units (GPUs) have made graphics cards an attractive platform for implementing computationally intense applications. With their numerous parallel computational pipelines and SIMD architecture, modern GPUs can outperform high-end microprocessors by one to three orders of magnitude, depending on the problem. Most work to date at EM Photonics a ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  6. Ultra-Thin Ply Formable Material from Reusable Short Carbon Fiber Composites

    SBC: Composites Automation LLC            Topic: T12

    This project develops an ultra-thin and formable prepreg material from reusable short carbon fiber composites (CFC), including process and material development, test panel fabrication and mechanical performance evaluation. Key to superior performance of ultra-thin ply materials is the ability to fabricate high fiber volume and uniform fiber distribution prepreg with low void content and layer thic ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. Hyperspectral Microwave Photonic Radiometer

    SBC: Phase Sensitive Innovations, Inc.            Topic: S1

    Passive Microwave Remote Sensing is currently utilized by NASA, NOAA, and others to conduct Earth Science missions, including weather forecasting, early warning systems, and climate studies. These sensors could also be used in upcoming missions such as Saturn’s moon to study atmospheric makeup.  On earth, humidity and temperature sounding is conducted near several absorption lines to de ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Radiation-Hardened CubeSat Power Management & Distribution (PMAD) for Europa Environment

    SBC: Ragnarok Industries Inc            Topic: S4

    In Phase 1, Ragnarok will mature the much-needed rad-hard BCDR technology from TRL 3 - 4. Phase 2 of Ragnarok’s efforts will proceed to develop the entire functional prototype radiation-hardened PMAD system including the newly developed BCDR hardware from Phase 1. Phase 2 efforts will conclude with a full Critical Design Review (CDR) and a completed and closed list of HRs and HRMPs. The ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. The Vulcan Advanced Hybrid Manufacturing System

    SBC: Made In Space, Inc.            Topic: H7

    Building on previously funded work by NASA and DARPA, its internal research and development projects, and manufacturing activities occurring on the International Space Station (ISS), Made In Space, Inc. (MIS) is developing the VULCAN system to address NASA’s requirement to produce high-strength, high-precision polymer and metallic components on-orbit with comparable quality to commercially-a ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  10. Industrial Crystallization Facility for Nonlinear Optical Materials

    SBC: Made In Space, Inc.            Topic: H8

    Made In Space, Inc. (MIS) proposes the development, to a critical design level, of an Industrial Crystal Facility (ICF) for microgravity product manufacturing and applied research. The ICF is focused on advanced materials engineering, rather than biomedical research, and expands utilization of the ISS into new product areas not previously investigated. Intended applications include nonlinear optic ...

    SBIR Phase II 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government