You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Cavity Enhanced Terahertz Absorption Spectrometer (CETAS)

    SBC: ALPHASENSE, INC.            Topic: A08075

    In this proposal, AlphaSense, Inc. (AI) and the Oklahoma State University (OKState) detail the development of a novel Cavity Enhanced Terahertz Absorption Spectrometer (CETAS). Key innovations of the proposed system include: a) the use of a small Whispering- Gallery- Mode (WGM) cavity to achieve very long pathlength; and b) the integration of the WGM cavity with the conventional pulsed and continu ...

    SBIR Phase I 2008 Department of DefenseArmy
  2. Automated Biological Sample Concentration and Detection System

    SBC: ANP TECHNOLOGIES INC.            Topic: A06T022

    ANP Technologies proposes to integrate a commercially available air sample concentrator from ICx MesoSystems with our automated detection instrument that uses the NIDS® multiplexed assays and NIDS® Auto-Reader (AR) device. A trigger device may also be incorporated into the final system, which might better enable the system to serve as a remote monitor of air streams. The proposed effort will b ...

    STTR Phase II 2008 Department of DefenseArmy
  3. Nano-BiCMOS Night Vision Camera

    SBC: B & W TEK INC            Topic: A08008

    Night vision capability is one of the most important battlefield advantages of the U.S. military, especially in today’s asymmetric warfare. The Gen III night vision goggles in service today is based on the vacuum tube technology with a semiconductor photo cathode, resulting in limitations on view angle, size, manufacturing cost and device operating lifetime. The requirement of special training i ...

    SBIR Phase I 2008 Department of DefenseArmy
  4. High Sensitivity Rugged Array Detectors for Field Deployed Instruments: Low-Light Level Camera for Laser-Induced Breakdown Spectroscopy (LIBS) and Ram

    SBC: B & W TEK INC            Topic: A06065

    Laser-induced breakdown spectroscopy (LIBS) and Raman spectroscopy are developing rapidly for chemical and biochemical sensing applications. There is an urgent need for high-sensitivity detectors so as to minimize sample quantity and maximize detection range from the source. In most field-deployable spectrometers, a photo-detector array is used for analyzing the spectral contents. The sensitivitie ...

    SBIR Phase II 2008 Department of DefenseArmy
  5. Small Scale Ethanol Drying

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    This program exceeded all key milestones. Using cellulose Waste, CMS demonstrated novel ethanol drying membranes via small scale dephlegmation process that yields fuel grade ethanol (FGE) at a lower cost than large switch grass ethanol plants. This success yields positive value for cellulose waste. We achieved targeted EPA goals of developing low cost environmentally friendly systems to enhance re ...

    SBIR Phase II 2008 Environmental Protection Agency
  6. Enhancing FPGA Performance Through Integrated Optical Interconnects

    SBC: EM PHOTONICS INC            Topic: AF06T006

    FPGAs have attracted a great deal of attention over the past decade because of their performance, scalability, and cost relative to traditional hardware platforms. However, one of the most significant disadvantages of FPGAs is based on the underlying architecture on which they are built. Specifically, routing delay through the chip is one of the largest bottlenecks in developing FPGA-based appli ...

    STTR Phase II 2008 Department of DefenseAir Force
  7. Reinforced High Temperature Titanium Metal Matrix Composite Systems For Impeller Applications In Advanced Army Turboshaft Engines

    SBC: FMW COMPOSITE SYSTEMS, INC.            Topic: A08023

    FMW Composite Systems, Inc., in collaboration with Honeywell Aerospace (Engine Manufacturer) proposes to develop a nano dispersion reinforced titanium metal matrix composite (TiMMC) system that can operate at higher temperatures for impeller applications in advanced Army turboshaft engines. After determining the goal operating temperatures and pressures that will be experienced in advanced turbine ...

    SBIR Phase I 2008 Department of DefenseArmy
  8. Rocket Motor- Dual Pulse

    SBC: KNOBLEY TECHNICAL ASSOCIATES, LLC            Topic: AF071150

    The Phase II Rocket Motor-Dual Pulse program is planned to advance technologies associated with rocket motor case materials and manufacturing, propellant grain designs with burn rate augmentation, insensitive munitions compliance, thermal barrier propellant grain segregation devices, high volumetric propellant loaded case assemblies and non-eroding nozzle systems. The program consists of a design ...

    SBIR Phase II 2008 Department of DefenseAir Force
  9. Radio Astronomy based design for an Ultra LNA system

    SBC: QUIET SKIES LLC CO.            Topic: A08010

    Topic A08-010 concerns one very important aspect of Aerospace Communications, developing a very sensitive receiver system, but with very low maintenance requirements. Our phase 1 proposal is based on refinement of existing technologies we have developed for the National Radio Astronomy Observatory (NRAO), re-packaged for use by the US Army. We have already built a cryogencially cooled system ...

    SBIR Phase I 2008 Department of DefenseArmy
  10. Satellite Structures with Engineered or Variable Electomagnetic Properties

    SBC: SPECTRUM MAGNETICS LLC            Topic: AF073102

    A novel methodology is proposed for the integration of low volume fractions (~5% by vol) of high aspect ratio ferromagnetic nanomaterials into structural composite materials, to engineer electromagnetic properties in the microwave regime. The general approach is to disperse the nanomaterial (flake form) in a thermoplastic polymer that is selected to be the same as the toughening agent in the struc ...

    SBIR Phase I 2008 Department of DefenseAir Force
US Flag An Official Website of the United States Government