Award Data

The objective of this Phase 1 effort is to develop an asymmetric supercapacitor (ASC) that provides>10 Wh/kg energy density and a high power density, and maintains this performance down to -55 degrees C. Yardney Technical Products (YTP), a recognized specialty high energy battery manufacturer in Pawcatuck, CT in collaboration with the Jet Propulsion Laboratory (JPL) proposes to design, develop and ...

There continues to be a need for low cost production and shipment of fuel-grade ethanol from agricultural sources. Ethanol from agricultural sources has many advantages including developing fuel independence and significantly reducing greenhouse gases. Also, bio-ethanol has significant value as an oxygenated and octane improver. Although ethanol from agricultural sources has many advantages, th ...

Detectors and radiation monitors for future high energy and nuclear physics experiments must be able to withstand radiation environments several orders of magnitude harsher than those of any current device. At present, most radiation detectors are based on silicon technology, however, the practical radiation hardness limit of silicon falls far short of requirements in future high ener ...

Ethylene and propylene are the primary feedstocks for the manufacture of polyethylene and polypropylene, respectively. These olefins represent a major component of the polymer manufacturing cost. Consequently, there is significant economic benefit in minimizing losses of unreacted olefin from the process. Some olefin loss is a result of the need to remove paraffin from the polymerization reactor ...

Synchrotron-based science has had a great scientific impact and will continue to have great impact going forward. In spite of the large investment in the 3rd generation light sources, most beam lines do not preserve the sources phase profile or brightness all the way to the sample. For these high brightness light sources, errors are almost completely due to distortion in the front-end optics cau ...

In this SBIR effort we will design (Phase I) and demonstrate (Phase II) an integrated silicon electronic-photonic upconversion receiver that when used with our photonic backend will allow for a highly sensitive, real-time, and economical millimeter wave (mmW) imaging system. The development of this chip leverages recent progress in CMOS and SiGe HBT high speed analog circuit design and integrates ...

The objective of this proposal is to design and develop UHF Satellite communications (SATCOM) circular polarized antennas using advanced metamaterials to achieve high gain performance with smaller dimensions (i.e., size and weight). The metamaterials we propose belong to a class of magneto-dielectric materials. The advantages and disadvantages of dielectric loading applied to electromagnetic devi ...

Although biodiesels have been increasingly used in automobiles, trains, commercial aircrafts and heating systems, they are not currently used in the military aircrafts and land vehicles because they typically do not meet the JP-8 performance criteria as specified by MIL-PRF-83133E. Unintentional contaminations by the biodiesels into the jet fuels can introduce adverse effects, including engine ope ...

In this Phase II SBIR effort we will dramatically reduce the size, weight, and power requirements of a passive millimeter wave imaging system based on optical upconversion. To this end, we will integrate custom silicon-germanium low noise amplifiers that have been designed to efficiently couple with our high performance lithium niobate upconversion modules. In Phase I we analyzed the design requ ...

The proposal will develop multiple design concepts, conduct a trade study, and identify the three (3) most promising concepts for affordable low-profile and wideband satellite communication antennas (LPWSA) with high data rate capability and minimum airstream protrusion for airborne platforms. Specifically, the study will investigate several modified hybrid low-profile antenna array concepts with ...