Award Data

There continues to be a need for low cost production and shipment of fuel-grade ethanol from agricultural sources. Ethanol from agricultural sources has many advantages including developing fuel independence and significantly reducing greenhouse gases. Also, bio-ethanol has significant value as an oxygenated and octane improver. Although ethanol from agricultural sources has many advantages, th ...

In this SBIR effort we will design (Phase I) and demonstrate (Phase II) an integrated silicon electronic-photonic upconversion receiver that when used with our photonic backend will allow for a highly sensitive, real-time, and economical millimeter wave (mmW) imaging system. The development of this chip leverages recent progress in CMOS and SiGe HBT high speed analog circuit design and integrates ...

The DOD has a need to leverage state of the art technologies remotely detect, collect, and evaluate physiological signals of interest. Applications and concepts-of-operations (CONOPs) that would benefit from this capability include, but are not limited to: building-clearing, warfighter health monitoring or battle damage assessment and triage, situational awareness and assessment. The main goal o ...

Although biodiesels have been increasingly used in automobiles, trains, commercial aircrafts and heating systems, they are not currently used in the military aircrafts and land vehicles because they typically do not meet the JP-8 performance criteria as specified by MIL-PRF-83133E. Unintentional contaminations by the biodiesels into the jet fuels can introduce adverse effects, including engine ope ...

The principal objective of this effort is to develop an advanced complex compound for ammonia-solid absorption chillers and demonstrate the enhanced sorbent for a 18,000 BTU/hr technology demonstrator in the Phase II effort. Phase I experimental data showed that it is feasible to make a fuel-fired sorption cooling system capable of 18,000 Btu/hr cooling and 105 kg dry-weight with 0.34 gal/hr of JP ...

The objective of this research is to enable pre-process milling parameter selection for"first part correct"production. In the proposed solution the Receptance Coupling Substructure Analysis (RCSA) approach will be used to couple the measured spindle-machine dynamics to models of the tool and holder and predict the assembly"s dynamic response. Given this information, frequency/time-domain algorithm ...

As an alternative to near-obsolete double-base or triple-base propellants, Digital Solid State Propulsion (DSSP) is developing Electric Solid Propellants (ESP) as a safe, green, higher performance highly manufacturable alternative for high velocity electro-thermal-chemical (ETC) gun rounds. These electric energetic materials are inherently safe, with ignition only possible via the sustained suppl ...

In this Phase II SBIR effort we will dramatically reduce the size, weight, and power requirements of a passive millimeter wave imaging system based on optical upconversion. To this end, we will integrate custom silicon-germanium low noise amplifiers that have been designed to efficiently couple with our high performance lithium niobate upconversion modules. In Phase I we analyzed the design requ ...

Proposed is the continuation of development of a High Efficiency Mobile Ice Maker (HEMIM) for the Army that is capable of integrating DC power from solar PV cells. The proposed ice maker will include a variable capacity vapor compression system with variable air flow as per ambient temperatures. The Performance of the high efficiency cycle will be enhanced by the use of advanced variable speed dri ...

The goal of this program is to develop an autonomous, hover-capable, flying robot with an onboard chemical sensor chip for chemical surveillance and environmental monitoring. The key capabilities of this integrated system will be, in order of priority: 1. Real-time chemical sensing and data transfer to a base station. The final platform will detect and identify airborne chemicals using the Mole ...