List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Real-Time In-Line Sensor for Watewater Monitoring

    SBC: UES, Inc.            Topic: B

    A consistent clean water supply is crucial to a stable and healthy population. Contamination of water resources with biological agents or toxins is concerning as clean water becomes a limited resource in society. The National Pollutant Discharge elimination systems (NPDES) permitting program requires permits for industrial and municipal water treatment facilities that discharge directly to surfa ...

    SBIR Phase I 2012 Environmental Protection Agency
  2. Microelectrode Array to Enable Robust Water Monitoring for Multiple Contaminants at Sub-Nanomolar Concentrations

    SBC: Faraday Technology, Inc.            Topic: A

    The proposed SBIR project addresses the need for robust, compact, sensitive, low cost sensors for measurement of contaminants in water. The proposed innovation is the development and validation of an ion-selective microelectrode array, capable of simultaneous detection of multiple species in aqueous environments, with detection limits similar to or exceeding those available using standard laborat ...

    SBIR Phase I 2012 Environmental Protection Agency
  3. Enhanced Drying of Pipeline Ethanol

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: H

    There continues to be a need for low cost production and shipment of fuel-grade ethanol from agricultural sources. Ethanol from agricultural sources has many advantages including developing fuel independence and significantly reducing greenhouse gases. Also, bio-ethanol has significant value as an oxygenated and octane improver. Although ethanol from agricultural sources has many advantages, th ...

    SBIR Phase I 2012 Environmental Protection Agency
  4. Functional Chrome Coatings on Hard to Access, Internal Surfaces of Industrial Parts from an Environmentally Benign Trivalent Chromium Bath

    SBC: Faraday Technology, Inc.            Topic: B

    Faraday Technology Inc., with the guidance of The Boeing Company and Advanced Tooling Corp, proposes a drop-in replacement chrome plating process that can coat complex, hard to access surfaces such as the interior of landing gear, using an environmentally benign trivalent chromium bath. The proposed manufacturing process meets the stated EPA needs b improving existing processes while utilizing a n ...

    SBIR Phase II 2012 Environmental Protection Agency
  5. Replacements for PVC and PE Water Pipes

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER1C

    METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  7. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
  8. Manufacturing Process Optimization of Ultrasonic Bonding of Metallic Composites

    SBC: Applied Optimization, Inc            Topic: A12aT004

    The research objective of the proposed work is to apply the foundational knowledge of ultrasonic bonding, metallic composites, microstructure transformation kinetics and material failure criteria to create a multi-scale simulation model for the optimization of ultrasonic additive manufacturing (UAM) of metallic composites. The ultrasonic fabrication will be represented as a superposition of multip ...

    STTR Phase I 2012 Department of DefenseArmy
  9. Silicon Receiver for Millimeter Wave Distributed Aperture Imager with Optical Upconversion

    SBC: Phase Sensitive Innovations, Inc.            Topic: SB113003

    In this SBIR effort we will design (Phase I) and demonstrate (Phase II) an integrated silicon electronic-photonic upconversion receiver that when used with our photonic backend will allow for a highly sensitive, real-time, and economical millimeter wave (mmW) imaging system. The development of this chip leverages recent progress in CMOS and SiGe HBT high speed analog circuit design and integrates ...

    SBIR Phase I 2012 Department of DefenseDefense Advanced Research Projects Agency
  10. Silicon based Millimeter-Wave (MMW) sparse array radiometer receiver for photonic processing

    SBC: DGNSS Solutions, LLC            Topic: SB113003

    The proposed innovation adopts a hybrid electro-optical approach, which combines the best of the electronic and photonic approaches to achieve high sensitivity, high inter-channel stability, and large-scale integration for an integrated mm-wave receiver. Silicon photonics provides the ideal platform for this as it enables the up-conversion of the mm-wave signals from each pixel to telecommunicatio ...

    SBIR Phase I 2012 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government