List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Functional Dataflow Programming Toolchain for Portable Parallel Code

    SBC: EM PHOTONICS INC            Topic: SB151004

    Modern computer systems often incorporate multiple computational devices such as conventional processors, graphics processing units (GPUs), specialized accelerators, and field-programmable gate arrays (FPGAs). Programmers are able to exploit these new architectures for improved performance and reduced power consumption, but at the cost of increased programing complexity. Further complicating matte ...

    SBIR Phase II 2016 Department of DefenseDefense Advanced Research Projects Agency
  3. Multi-material Additive Manufacturing of RF Electronics

    SBC: DeLUX Engineering, LLC            Topic: A16006

    To reduce size, weight, power and cost (SWaP-c) military platforms have been evolving towards a more integrated design approach that efficiently utilizes all available space.To accommodate limited space constraints many commercial off-the-shelf (COTS) systems will need to be replaced by custom designed and fabricated components.For the case of radiofrequency (RF) electronic systems this will requi ...

    SBIR Phase I 2016 Department of DefenseArmy
  4. Multimodal Non- destructive Evaluation of Internal Surfaces of Holes in Steel Structures

    SBC: ALPHASENSE, INC.            Topic: A16012

    A bore evacuator is generally used in gun barrel of armored fighting vehicles to help prevent poisonous propellant gases from venting back into the fighting compartment. It consists of a ring of holes drilled into the barrel, surrounded by a cylindrical pressure reservoir. Under typical operating conditions, pitting corrosions and stress corrosion cracks can form in the inner walls of those drille ...

    SBIR Phase I 2016 Department of DefenseArmy
  5. Advanced Spectrally Selective Materials for Obscurant Applications

    SBC: LUMILANT, INC.            Topic: A13AT016

    Plasmonic metamaterials, composed of patterned metallic and dielectrics, can be engineered to have interesting optical properties that are attractive for a range of advanced obscurant applications. These particles are typically fabricated on planar surfaces, since patterning planar surfaces to achieve the desired effects is relatively straightforward.However, for planar geometries the particles op ...

    SBIR Phase II 2016 Department of DefenseArmy
  6. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government