You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: ALPHACORE INC            Topic: NA

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  3. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. HQ-55 VTOL UAS for Ship Based Operation

    SBC: Latitude Engineering, LLC            Topic: 832

    TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Biometrics-at-a-distance

    SBC: VAWD APPLIED SCIENCE & TECHNOLOGY CORP            Topic: SB121004

    VAWD is proud to submit this proposal to explore a new sensor development potentially capable of precise determination of Potential Threat Elements (PTE) identified by Polarimetric STTW radar systems. Current STTW radar has demonstrated the ability to detect persons through obstructions at operational relevant ranges. Although the systems have proven the ability to capture differentiating characte ...

    SBIR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  7. A Low-Toxicity, Non-Pyrotechnic, High Yield Visible Smoke Material

    SBC: Lombardi, John L.            Topic: A17059

    Novel, non-pyrotechnic white smoke formulations will be developed during this effort.Upon aerosolization, these polymers will react with both ambient moisture and nitrogen present in air; producing smoke exhibiting significant obscuring power within visible and NIR spectral regimes.

    SBIR Phase I 2018 Department of DefenseArmy
  8. Near Real-Time LIDAR Processing and Exploitation Algorithm Development

    SBC: RINCON RESEARCH CORPORATION            Topic: A17143

    Today’s advanced LiDAR systems typically lack the ability to autonomously detect man-made shapes and structures and provide that 3-D data to Geospatial Intelligence quickly and effectively to aid in tactical decisions. Rincon Research Corporation (RRC) presents its solution to this problem through the design and development of algorithms that perform onboard Automated Feature Extraction (AFE) an ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Air Platform Passive Occupant Protection

    SBC: SAFE INC            Topic: A18001

    Body flailing during a severe helicopter crash can lead to injury or death when the head and upper torso strike rigid objects within the flail envelope.Currently fielded restraint systems allow a large flail envelope because the strap routing and anchor positions require some body motion to occur before the straps can develop significant reaction loads.Safe, Inc. (Safe) is proposing an alternate d ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government