List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Capacitive removal of PFOA and PFOS from Drinking Water

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: 17NCER1A

    Polyfluoroalkyl and perfluoroalkyl compounds (PFCs) have been used commercially since the 1940’s due to their high level of chemical stability, almost frictionless surface or waterproofing characteristics. Elevated levels of PFCs have been linked to cancer and other health problems including reproductive and developmental risks. PFOA and PFOS are amongst the most prevalent of the PFCs with low l ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Additive Manufacturing of Long Rod Penetrator Sabots using Carbon Nanotube Metal Matrix Composites

    SBC: Shepra INC            Topic: A17033

    The purpose of this SBIR is to develop a carbon nanotube metal matrix composite that can used in the manufacturing of small caliber sabots for use with long rod penetrators. In phase one, Additive Manufacturing has been used to make carbon nanotube aluminum metal matrix composites that met threshold requirements and have achieved 95.8% of the objective modulus and 97.5% of the objective strength o ...

    SBIR Phase II 2018 Department of DefenseArmy
  5. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Intelligent Cyber Adversaries Tool Suite (ICATS)

    SBC: Dignitas Technologies, LLC            Topic: A18024

    Our Intelligent Cyber Adversaries Tool Suite (ICATS) system-of-systems builds upon existing work integrating cyber effects into Live, Virtual, Constructive, and Gaming (LVC&G) training systems and leverages other existing systems in the cyber domain. We leverage several in-work technologies to bring together complementary tools and achieve rapid progress.We research use of an existing framework to ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. High Temperature Motor Drive

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18100

    The goal of this proposal is to develop a WBG based motor drive that can interface with military 600 Vdc power systems, provide 18 kW of output power, and have full power capability with ambient air temperatures of 71 C and liquid coolant temperatures of 105 C. Building upon an existing 105 C coolant SiC based motor drive, Mainstream Engineering proposes a revised SiC based motor drive that is sma ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Non-Pneumatic Tire for On-Highway and Off-Road Mobility

    SBC: INDIANA TOOL & MFG. CO., INC.            Topic: A18101

    The purpose of this proposal is to demonstrate the feasibility, through modeling and simulation, of integrating engineered polyhedral Phase Transforming Cellular Matrix (PXCM) materials as a dynamic, elastically deformable solution for non-pneumatic tires that can; 1) resist loss of mobility due to hazards that include ballistic/explosive threats, and road debris, 2) extend capability allowing the ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Development of a Modular, Open-Architecture, Integrated, and Validated Mobility Prediction Capability

    SBC: Advanced Science And Automation Corp            Topic: A18105

    The objective of this project is to develop a modular, open-architecture, physics-based ground vehicle mobility prediction software tool for world-wide terrains that are encountered in military applications including on-road and off-road soft soil terrains. The tool will integrate three modules: (1) Physics-Based Vehicle-Terrain Modeling tool; (2) Geographic Information System (GIS); and (3) Stoch ...

    SBIR Phase I 2018 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government