List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Image Enhancement and Machine Learning for Improving Man-Portable Targeting Systems

    SBC: EM PHOTONICS INC            Topic: N172102

    Modern DoD applications are benefiting from the proliferation of EO/IR sensor technology. As imagers become cheaper and smaller, they are being more widely deployed for a variety of scenarios. This trend is exemplified by the Navys Future Targeting System (FTS), which will provide laser designation, laser spot imaging, and some target location functions in a single 5.5-pound unit, replacing discre ...

    SBIR Phase I 2018 Department of DefenseNavy
  4. Advanced Solutions to Enable Next-generation Terminals

    SBC: LOADPATH, LLC            Topic: N172137

    For MIDS JTRS designers who face increasing heat loads with existing thermal designs that limit system performance, the LoadPath Advanced Solutions to Enable Next-generation Terminals (ASENT) is a conjugate thermal solution that enables simple integration of a collection of advanced thermal enhancements to overcome this challenge. Unlike traditional designs that rely on standard thermal technologi ...

    SBIR Phase I 2018 Department of DefenseNavy
  5. Power Factor Correction

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: N181005

    The primary objective of this Phase I proposal is to design, develop, and demonstrate the feasibility of a power factor compensation device for a 65 kVA, 115V, 400-Hz aircraft power system. Based on identified power factor conditions in the F-18 Super Hornet platform, the compensation system must correct an existing leading 0.98 power factor to a target lagging 0.93 (minimum objective lagging 0.97 ...

    SBIR Phase I 2018 Department of DefenseNavy
  6. Development of an Autonomous Damage Assessment Module (ADAM) for use as an Electronic Battle Damage Indicator

    SBC: Voss Scientific, LLC            Topic: N181075

    Future battlefields employing directed energy technologies will require an electronic Battle Damage Indicator (eBDI) tool that can measure the radiated Radio Frequency (RF) emissions from a target before and after a High Power RF (HPRF) attack and determine if target electronics have been significantly disrupted. We propose an innovative eBDI using a system so compact, lightweight and inexpensive ...

    SBIR Phase I 2018 Department of DefenseNavy
  7. Photolithographically Defined Optical Cooling Devices for Electronic Cooling Plane Applications

    SBC: PICOTEK LLC            Topic: N181081

    The current exponential growth of energy consumption in supercomputers and data centers has become an ecological and economical problem for simple reasons of power delivery, power dissipation and heat removal. To go on with the exponential growth in the use of information we need to continue reducing the energy required to handle each bit. This reduction, however, becomes an increasingly harder pr ...

    SBIR Phase I 2018 Department of DefenseNavy
  8. Implementation and Demonstration of LUCS, a Live, Ultra-Compact Multispectral USPL Characterization System

    SBC: Voss Scientific, LLC            Topic: N171085

    Researchers developing Ultra-Short-Pulse-Lasers (USPLs) need real-time measurements of key parameters, on both single-shot and statistical basis. Based on the Phase I results, we propose to assemble and demonstrate a fully integrated, intuitive and user friendly, Live USPL Characterization System, termed LUCS, using novel methods of data capture, data reduction, and distributed processing. Phase I ...

    SBIR Phase II 2018 Department of DefenseNavy
  9. Optical Cryocooling for Precision Metrology

    SBC: ThermoDynamic Films LLC            Topic: AF10BT02

    Optical cryocoolers, which are compact and produce no vibrations, are ideal for many electronics and sensor applications. In particular, some advanced metrology systems require cooling to around 124 K, the temperature at which the coefficient of thermal expansion for crystalline silicon goes through a null point. Currently, the dominant solid-state cooling technology is thermoelectric cooling, whi ...

    STTR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  10. In Theater Additive Manufacturing of Ceramic Armor for Dismounted Soldiers and Structures

    SBC: Optical Materials Solutions LLC            Topic: A17AT012

    Goodman Technologies (GT) and University of Hawaii (a Department of Defense University Affiliated Research Center and Minority Serving Institution) in partnership with Robocasting Enterprises (Small Business spin-off from Sandia National Laboratories technology transfer program), will meet all Army objectives (and more) by 3D printing B4C, B6O, B4C-SiC hybrid and other ceramic nanocomposite armor ...

    STTR Phase II 2018 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government