You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Inexpensive Formaldehyde Sensors for Indoor Air Quality (IAQ) Applications

    SBC: GINER INC            Topic: 16NCER1A

    Recognizing the need to monitor formaldehyde gas in residential and industrial buildings,_x000D_ Giner, Inc. (Giner) will continue the successful work started in Phase I and will develop,_x000D_ fabricate and demonstrate a formaldehyde gas monitor that is capable of continuously_x000D_ measuring formaldehyde in the range of 0-2000 parts per billion (ppb) with a resolution of 10 ppb. The wireless c ...

    SBIR Phase II 2018 Environmental Protection Agency
  2. Atomic Layer Deposition of Highly Conductive Metals

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: A17AT001

    Novel photonic structures, such as periodic metal-dielectric photonic bandgap structures (MDPBG) have the potential to revolutionize the field of optical windows. The large mismatch in the permittivities of the metal and dielectric creates resonant tunneling, which allows for high transmission in regions where metals are typically opaque. This property makes MDPBGs very attractive for screening or ...

    STTR Phase II 2018 Department of DefenseArmy
  3. Low-Loss Commercial Deposition Technology for Thick Ferrites and Ferrite/Insulator Films on Printed Circuit Boards

    SBC: WINCHESTER TECHNOLOGIES LLC            Topic: A16020

    Integration of RF ferrites on printed circuit boards (PCBs) is highly desired for realizing compact, lightweight and low-cost systems with different RF ferrite components, including inductors, antennas and antenna arrays, etc. However, it has been challenging to integrate ferrites on PCBs. Spin spray deposition can produce fully dense, high crystalline quality, and low-loss RF ferrites at a low te ...

    STTR Phase II 2018 Department of DefenseArmy
  4. Replacements for PVC and PE Water Pipes

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER1C

    METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
  7. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  8. Operational Representations and Interactive Overlay Environment (ORION)

    SBC: CHARLES RIVER ANALYTICS, INC.            Topic: A18049

    Tactical Commanders must successfully integrate and manage dynamic, time-sensitive battlefield information from large numbers of heterogeneous sources to perform their jobs effectively. While current tools enable distribution of large quantities and types of information, existing systems are not designed to adequately support the underlying cognitive work and information needs of decision makers. ...

    SBIR Phase II 2018 Department of DefenseArmy
  9. Low Noise High Dynamic Range Sky Characterization System

    SBC: SPECTRAL SCIENCES INC            Topic: A17045

    The development of tactical IR imaging equipment requires calibrated night sky spectral radiance measurements from the visible (VIS) through the shortwave infrared (SWIR). Measuring the dark moonless night sky spectra at the required resolution is challenging due to the background noise produced from external thermal emissions. Spectral Sciences, Inc. has designed a low noise spectrometer with mul ...

    SBIR Phase II 2018 Department of DefenseArmy
  10. FTL's FASCI, Forward Area Suspended Contaminant Identifier, Field Instrumentation to measure, quantify, and characterize fuel contaminants

    SBC: FTL LABS CORP            Topic: A17116

    To avoid machine failure, diesel engine hardware manufacturers recommend limiting fuel contamination particles based on number and size distribution. Work performed by TARDEC has developed limits for particulate and free water contamination in fuel utilizing light obscuration particle counting; however, this approach is unable to differentiate between solid particulates, free water droplets, and a ...

    SBIR Phase II 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government