You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Solid State Additive Manufacturing of Titanium Alloys Using Cold Spray

    SBC: VRC Metal Systems, LLC            Topic: A16AT002

    The US Army needs a method for large scale repair and additive manufacture of Ti-6Al-4V components in support of its light weighting initiative. Cold spray metal deposition technology is a solid-state bonding technique where supersonic powdered metal is deposited on a metallic substrate through adiabatic shearing processes at low temperature. Cold spray offers an ideal solution for the Army’s ne ...

    STTR Phase II 2018 Department of DefenseArmy
  2. Volumetric Spectral Diagnostics of Particle Laden Plumes

    SBC: COMBUSTION RESEARCH & FLOW TECHNOLOGY INC            Topic: A17120

    The primary technology developed under this program will be an advanced flowfield diagnostic system to provide comprehensive reactive scalar measurements in high speed, turbulent reacting flows. Such a diagnostic technique is needed to support computational modeling advancements that are critical to support Army force protection requirements against tactical and theater ballistic missile threats.T ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Accurate Hybrid Flowfield Approaches for High Altitude Maneuverability

    SBC: COMBUSTION RESEARCH & FLOW TECHNOLOGY INC            Topic: A17122

    Army defense technologies for high speed, lethal threat intercept increasingly rely on high maneuverability of the kill vehicle through both aerodynamic and thrust augmentation while the threats themselves have relied on equally increasing maneuvering defenses to avoid intercept. Because it is in the interest of defense systems to target the threat as early as possible, intercept locations in high ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Nanometallic Matrices for Use in Energetic Formulations

    SBC: GENERAL SCIENCES INC            Topic: A17125

    The effort proposed by General Sciences, Inc. (GSI) is based on using available nanosize additives which upon reaction within the detonation front will enhance blast and impulse (in the case of the explosive) as well as increase thrust, impetus and projectile-velocity in the case of propellants. Inclusion of other additives to conventional explosives and propellants upon reaction produce finely su ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. SampleFlex: An Elastomer-based Blood Sampling Technology for Collection, Storage and Assessment of Toxicant Exposure

    SBC: Lifeware Labs, LLC            Topic: A17140

    Through this effort, we propose to develop SampleFlex, an elastomer-based field-capable sampling technology for collecting and preserving blood samples. Our approach improves upon paper-based blood collection methods which utilize dried filter paper cards for Dried Blood Spots (DBS) by encapsulating the sample within a flexible elastomer package to protect the sample during transport and storage.R ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Efficient Prediction of Thermal Stresses and Distortion in Complex Optimized Missile Structures

    SBC: MATERIALS SCIENCES LLC            Topic: A16104

    Additive manufacturing (AM) technology offers the potential to fabricate complex geometries that cannot be realized using conventional subtractive methods. In current industrial AM processes, determination of the type and distribution of support structure is often based solely on technician experience. This process is far from optimal and as a result, significant non-recurring engineering costs ar ...

    SBIR Phase II 2018 Department of DefenseArmy
  7. Innovative Technologies for High Power Amplification at THz frequencies

    SBC: CARLEY TECHNOLOGIES, INC            Topic: SB162006

    The objective of the proposed project is to develop designs for manufacturable all-metal terminal hot-electron transistors (AMTHETs) that will enable 1W – 10W THz RF amplifiers and oscillators. The proposed work will focus on quantum-mechanical modelin...

    SBIR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  8. Plasma-Enhancement of Absorbers for Improved Removal of PFOS and PFOA from Water

    SBC: AA PLASMA LLC            Topic: 17NCER1A

    New regulations and advisory levels for perfluoroalkyl substances have resulted in increased drinking water treatment costs or abandonment of drinking water sources. Treatment technologies are needed that can achieve low parts-per-trillion levels. Presently, there are insufficient treatment technologies that can destructively remove perfluorooctanoic acid (PFOA) and/or perfluorooctane sulfonic aci ...

    SBIR Phase I 2018 Environmental Protection Agency
  9. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  10. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
US Flag An Official Website of the United States Government