List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT CORPORATION            Topic: A17003

    Sentient Corporation proposes to integrate its DigitalClone Component (DCC) physics-based modeling technology and Johns Hopkins University Applied Physics Laboratorys in-situ thermal sensors to develop a comprehensive sensor-based tool to monitor, identify and locate defects in metallic additive manufacturing, and create a DCC model-enabled feedback loop to correct the process-induced defects to i ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Non-Pneumatic Tire for On-Highway and Off-Road Mobility

    SBC: INDIANA TOOL & MFG. CO., INC.            Topic: A18101

    The purpose of this proposal is to demonstrate the feasibility, through modeling and simulation, of integrating engineered polyhedral Phase Transforming Cellular Matrix (PXCM) materials as a dynamic, elastically deformable solution for non-pneumatic tires that can; 1) resist loss of mobility due to hazards that include ballistic/explosive threats, and road debris, 2) extend capability allowing the ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Development of a Modular, Open-Architecture, Integrated, and Validated Mobility Prediction Capability

    SBC: Advanced Science And Automation Corp            Topic: A18105

    The objective of this project is to develop a modular, open-architecture, physics-based ground vehicle mobility prediction software tool for world-wide terrains that are encountered in military applications including on-road and off-road soft soil terrains. The tool will integrate three modules: (1) Physics-Based Vehicle-Terrain Modeling tool; (2) Geographic Information System (GIS); and (3) Stoch ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Gallium Nitride (GaN) based 28 VDC Circuit Protection and Distribution

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: A16087

    Recent advances in commercially available Gallium Nitride (GaN) MOSFETS offer significant advantages compared to traditional Silicon devices for circuit protection and power distribution applications including the availability of devices in advanced packaging options, lower on-state resistances, and improved performance in harsh electromagnetic environments.To demonstrate these advantages of GaN i ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. Rapid Concentration of Viruses from Water

    SBC: SCIENTIFIC METHODS INC            Topic: N/A

    In the U.S., several high profile outbreaks of waterborne illness during the past 15 years have highlighted the need for solutions to drinking water contamination. Several recent studies suggest that approximately 20% of the surface and ground source waters in the U.S. are contaminated with viruses. However, there is very little data on virus occurrence in drinking water, which is mostly due to ...

    SBIR Phase I 2009 Environmental Protection Agency
  9. Rapid concentration of viruses from water

    SBC: SCIENTIFIC METHODS INC            Topic: 08NCERD1

    In the United States, several high profile outbreaks of waterborne illness during the past 15 years have highlighted the need for solutions to drinking water contamination.  Several recent studies suggest that approximately 20 percent of the surface and ground source waters in the U.S. are contaminated with viruses.  There is very little data, however, on virus occurrence in drinking water, ...

    SBIR Phase I 2009 Environmental Protection Agency
  10. Innovative Real Time Probes for Plastic Bonded Exp

    SBC: ALPHASENSE, INC.            Topic: A09026

    In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

    SBIR Phase I 2009 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government