Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. REMOVAL OF VOLATILE ORGANIC COMPOUNDS FROM GASEOUS EFFLUENT STREAMS BY NOVEL PERFLUOROMEMBRANES

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    VOLATILE ORGANIC COMPOUND (VOC) EFFLUENT STREAMS ARE A SERIOUS AIR POLLUTION PROBLEM. CONTROL TECHNOLOGIES FOR VOCS HAVE BEEN OXIDATION OR CARBON ABSORPTION BUT RECENTLY MEMRANES HAVE SHOWN EFFECTIVENESS. PRESENT MEMBRANE PROCESSES WORK BY PREFERENTIALLY PASSING VOCS (VERSUS AIR) THROUGH THE MEMBRANE AND THEN COMPRESSING AND CONDENSING OUT DOWNSTREAM VOCS. ADVANTAGES OF THIS MEMBRANE PROCESS INCLU ...

    SBIR Phase II 1994 Environmental Protection Agency
  2. Amorphous Alloy Coatings for Hard Chromium Replacement

    SBC: Integran Technologies U.S.A. Inc.            Topic: N/A

    Hard chromium coatings (0.25 to10 mil thick) are used extensively for imparting wear and erosion resistance to components in both industrial and military applications. The most common means of depositing hard chromium has been through the use of chromic acid baths containing hexavalent chromium (Cr+6). However, as a result of its toxicity, exposure levels of Cr+6 have been limited. An alternati ...

    SBIR Phase I 2009 Environmental Protection Agency
  3. A CHEMICAL PROCESS TO TREAT SPENT POTLINERS AND PRODUCE SEVERAL RECYCLABLE COMMERCIALLY VALUABLE PRODUCTS

    SBC: Vortec Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  4. Amorphous Alloy Surface Coatings for Hard Chromium Replacement

    SBC: Integran Technologies U.S.A. Inc.            Topic: 08NCERA1

    Hard chromium coatings (0.25 to10 mil thick) are used extensively for imparting wear and erosion resistance to components in both industrial and military applications. The most common means of depositing hard chromium has been through the use of chromic acid baths containing hexavalent chromium (Cr+6). However, as a result of its toxicity, exposure levels of Cr+6 have been limited. An alternati ...

    SBIR Phase I 2009 Environmental Protection Agency
  5. Plasma-Enhancement of Absorbers for Improved Removal of PFOS and PFOA from Water

    SBC: AA Plasma LLC            Topic: 17NCER1A

    New regulations and advisory levels for perfluoroalkyl substances have resulted in increased drinking water treatment costs or abandonment of drinking water sources. Treatment technologies are needed that can achieve low parts-per-trillion levels. Presently, there are insufficient treatment technologies that can destructively remove perfluorooctanoic acid (PFOA) and/or perfluorooctane sulfonic aci ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  7. Simulation of Critical Interior Ballistic Effects

    SBC: 3c Systems, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  8. High Velocity Particle Consolidation Utilizing Liq

    SBC: Advanced Cooling Technologies, Inc.            Topic: A09050

    This Small Business Innovative Research Phase I project will develop an innovative High Velocity Particle Consolidation system using liquid particle acceleration mechanisms for Cold Spray applications. Conventional Cold Spray uses high pressure process gas to accelerate particles to a critical velocity, so that upon impact with a substrate, the particles plastically deform and create a coating. ...

    SBIR Phase I 2009 Department of DefenseArmy
  9. Permanent magnets with extremely high energy product for electromechanical devices

    SBC: ADVANCED MATERIALS CORP.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  10. Innovative Real Time Probes for Plastic Bonded Exp

    SBC: ALPHASENSE, INC.            Topic: A09026

    In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

    SBIR Phase I 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government