List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT CORPORATION            Topic: A17003

    Sentient Corporation proposes to integrate its DigitalClone Component (DCC) physics-based modeling technology and Johns Hopkins University Applied Physics Laboratorys in-situ thermal sensors to develop a comprehensive sensor-based tool to monitor, identify and locate defects in metallic additive manufacturing, and create a DCC model-enabled feedback loop to correct the process-induced defects to i ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Innovative Real Time Probes for Plastic Bonded Exp

    SBC: ALPHASENSE, INC.            Topic: A09026

    In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

    SBIR Phase I 2009 Department of DefenseArmy
  7. Nano-Passivation of GaSb/InAs Strained Layer Superlattices Infrared Detector

    SBC: B & W Tek Inc.            Topic: A08103

    Mid-infrared (MWIR, wavelength ~10 micron) imaging has significant importance in military surveillance and target recognition, since human body radiation peaks in MWIR. The GaSb/InAs type-II Strained Layer Superlattice (SLS) MWIR detector has been under intensive investigation recently. While much progress has been made to enhance wavelength coverage, one of the few remaining issues has been its r ...

    SBIR Phase I 2009 Department of DefenseArmy
  8. Low Light Level Silicon-Germanium Nano-BiCMOS Infrared Camera

    SBC: B & W Tek Inc.            Topic: A08100

    Low light level infrared imaging has significant importance in military surveillance and target recognition. The proposed broadband low-light-level nano-BiCMOS camera covers visible and near infrared bands from 400 nm to 1,550 nm wavelengths. With a proven nano-technology, the proposed nano-BiCMOS photo-detector solves this long-standing tradeoff between quantum efficiency and dark current by in- ...

    SBIR Phase I 2009 Department of DefenseArmy
  9. High-Temperature, Wireless, Passive, Multicode Sensor System for Rotorcraft Applications

    SBC: ENVIRONETIX TECHNOLOGIES CORPORATION            Topic: A09015

    This project will demonstrate the feasibility of using an array of wireless, passive, microwave acoustic sensors and accompanying interrogator system to monitor temperature and pressure in harsh environments encountered within a turboshaft rotorcraft engine. The proposed sensor technology is based on langasite piezoelectric crystals and stable nanostructured thin film electrodes, and will enable ...

    SBIR Phase I 2009 Department of DefenseArmy
  10. GPU-Based CFD Analysis for Modeling Complex UAV Flight Scenarios

    SBC: EM PHOTONICS INC            Topic: SB082024

    Recent advances in computing have produced special-purpose hardware comprised of vector processors streamlined for high-performance computations. Development of these devices, such as graphics processing units (GPUs) and the Cell Broadband Engine (Cell Processor), has been advanced by the videogame industry. In an effort to increase flexibility and enter new markets, vendors have increased platf ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government