List

To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

Sentient Corporation proposes to integrate its DigitalClone Component (DCC) physics-based modeling technology and Johns Hopkins University Applied Physics Laboratorys in-situ thermal sensors to develop a comprehensive sensor-based tool to monitor, identify and locate defects in metallic additive manufacturing, and create a DCC model-enabled feedback loop to correct the process-induced defects to i ...

To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

Mid-infrared (MWIR, wavelength ~10 micron) imaging has significant importance in military surveillance and target recognition, since human body radiation peaks in MWIR. The GaSb/InAs type-II Strained Layer Superlattice (SLS) MWIR detector has been under intensive investigation recently. While much progress has been made to enhance wavelength coverage, one of the few remaining issues has been its r ...

Low light level infrared imaging has significant importance in military surveillance and target recognition. The proposed broadband low-light-level nano-BiCMOS camera covers visible and near infrared bands from 400 nm to 1,550 nm wavelengths. With a proven nano-technology, the proposed nano-BiCMOS photo-detector solves this long-standing tradeoff between quantum efficiency and dark current by in- ...

Recent advances in computing have produced special-purpose hardware comprised of vector processors streamlined for high-performance computations. Development of these devices, such as graphics processing units (GPUs) and the Cell Broadband Engine (Cell Processor), has been advanced by the videogame industry. In an effort to increase flexibility and enter new markets, vendors have increased platf ...

Aging and newer composite aircraft fleets have led to the need for advanced damage detection systems. Inspections for damage in the field are limited due to equipment capability, size/weight, automation challenges, human error and disassembly issues. A portable, lightweight, robust inspection system powered by an user-friendly, automated software system, with remote scanning capability, could imp ...

There is a recognized need for more effective and economical treatment processes for oily bilge waters. Direct filtration through currently available ultrafiltration (UF) membranes is a mechanically simple process that can provide excellent effluent quality. A limitation to more extensive use of this technology is the tendency of the hydrophilic membranes currently used to foul in the presence of ...