List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Innovative Approaches to Agile Software Development for Secure Modular Avionics Architectures

    SBC: AVILUTION            Topic: A16117

    Avilution is performing pioneering work to further the development of the eXtensible Flight System(XFS), a suite of portable avionics software applications with a common framework, which allows streamlined integration of new sensors, safety, and technology for private andcommercial aviation. Avilution uses rapid software development practices with new ideas and technologies to create an innovative ...

    SBIR Phase II 2018 Department of DefenseArmy
  3. Provably Unclonable Functions on Re-configurable Devices

    SBC: IERUS TECHNOLOGIES, INC            Topic: A18BT001

    The ability to authenticate electronic devices is an important step towards modernizing the hardware/software of our Nations communication systems. Protecting these targeted networks and devices from malicious cyber-based attacks is becoming increasingly important as the technological and cyber capabilities of our adversaries continue to advance. In addition to network security, device authenticat ...

    STTR Phase I 2018 Department of DefenseArmy
  4. Rapid Response Small Launcher Technology

    SBC: X-Bow Launch Systems Inc.            Topic: SB173006

    X-Bow Launch Systems and its partners have developed a feasible concept to additively manufacture solid propellant. This additive manufacturing method, adapted from existing scaleable processes, will reduce the lifecycle cost and improve the overall responsiveness of the X-Bow Launch Systems vehicle. The innovation is to adapt breakthrough manufacturing processes developed for the Li-Ion battery i ...

    SBIR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  5. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT CORPORATION            Topic: A17003

    Sentient Corporation proposes to integrate its DigitalClone Component (DCC) physics-based modeling technology and Johns Hopkins University Applied Physics Laboratorys in-situ thermal sensors to develop a comprehensive sensor-based tool to monitor, identify and locate defects in metallic additive manufacturing, and create a DCC model-enabled feedback loop to correct the process-induced defects to i ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Extremely High Frequency Rail-based Synthetic Aperture Radar

    SBC: IERUS TECHNOLOGIES, INC            Topic: A17117

    Recent advances in extremely high frequency (EHF) radiation sources have resulted in ability to extend RF techniques to higher and higher frequencies in the electromagnetic spectrum. While signal strength, and consequently signal to noise ratios (SNR) and signal to clutter ratios (SCR) remain the primary limitation, constantly increasing power levels in these bands result in the accessibility of a ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Dynamic Near-Field Radar Target Modeling in Scene Generator Systems

    SBC: SIMULATION TECHNOLOGIES, INC.            Topic: A18005

    The importance of simulation in the missile acquisition process and in development of advanced seeker algorithms has been well established.With the ever increasing fidelity of radar sensors and sensor algorithms for aimpoint accuracy, hit-to-kill, and fuzing techniques and the fact that near-field effects of a target can produce significantly different radar signatures, as compared to the far-fiel ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. Dynamic Near-Field Radar Target Modeling in Scene Generator Systems

    SBC: Signature Solutions, Inc.            Topic: A18005

    High fidelity scene generators utilize radar target models over the entire flight profile of a weapon system or sensor under test.As such, radar signatures generated from these models must encompass the entire simulation flight path to include a continuum of engagement conditions ranging from the far-field to very near-field.Signature Solutions, Inc. proposes a technical approach for dynamic and c ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Development of a Lightweight Turbocharger that Delivers 108 HP at 30K ft Altitude for UAV's using Compression Ignition Engines

    SBC: Hartzell Engine Technologies LLC            Topic: A18019

    The Department of Defense desires to develop and produce a reliable turbocharger for an aviation compression-ignition engine with a maximum power of 180 hp at sea level which additionally provides 60% of maximum sea level power at 30,000 ft.The challenge is to reliably provide adequate manifold pressure to achieve the desired power at altitude.Diesel engines with existing standard turbocharger tec ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government