List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT CORPORATION            Topic: A17003

    Sentient Corporation proposes to integrate its DigitalClone Component (DCC) physics-based modeling technology and Johns Hopkins University Applied Physics Laboratorys in-situ thermal sensors to develop a comprehensive sensor-based tool to monitor, identify and locate defects in metallic additive manufacturing, and create a DCC model-enabled feedback loop to correct the process-induced defects to i ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Preconcentration Technoloogy for Infrared Analysis of Organophosphates in Water

    SBC: Orono Spectral Solutions Inc.            Topic: I

    Organophosphates cannot currently be analyzed in the field using existing technologies, due to insufficient sensitivity of currently fielded instruments. This inability reduces the number of analyses that a government agency can perform on a water supply to ensure its safety to humans and the environment. The objective of this Phase I effort is to design a novel strategy that preconcentrates org ...

    SBIR Phase I 2012 Environmental Protection Agency
  7. Enhanced Drying of Pipeline Ethanol

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: H

    There continues to be a need for low cost production and shipment of fuel-grade ethanol from agricultural sources. Ethanol from agricultural sources has many advantages including developing fuel independence and significantly reducing greenhouse gases. Also, bio-ethanol has significant value as an oxygenated and octane improver. Although ethanol from agricultural sources has many advantages, th ...

    SBIR Phase I 2012 Environmental Protection Agency
  8. Silicon Receiver for Millimeter Wave Distributed Aperture Imager with Optical Upconversion

    SBC: Phase Sensitive Innovations, Inc.            Topic: SB113003

    In this SBIR effort we will design (Phase I) and demonstrate (Phase II) an integrated silicon electronic-photonic upconversion receiver that when used with our photonic backend will allow for a highly sensitive, real-time, and economical millimeter wave (mmW) imaging system. The development of this chip leverages recent progress in CMOS and SiGe HBT high speed analog circuit design and integrates ...

    SBIR Phase I 2012 Department of DefenseDefense Advanced Research Projects Agency
  9. Surface Engineering Technologies for Improved Gear Efficiency

    SBC: SENTIENT CORPORATION            Topic: A12022

    The overall goal of this project is to develop an optimized surface texture process in order to maximize the efficiency of rolling/sliding contacts such as gears. Development of this high efficiency, rolling/sliding surface will be guided by Sentient's unique combination of modeling capabilities in the area of mixed-EHL contacts, scuffing, and contact fatigue life prediction. Phase I wi ...

    SBIR Phase I 2012 Department of DefenseArmy
  10. Development of Lightweight, Recyclable Low Cost, Nonwoven Cloth Duck Material

    SBC: Tex Tech Industries Inc.            Topic: A12054

    Nylon fabric is a polyamide that is lightweight, strong and durable. The fabric dries quickly when wet and provides comfort. Nylon is used in multiple applications ranging from apparel, home furnishings, industrial applications and geo-textiles. The cloth specified by this proposal is Mil-C- 43734"Cloth, Duck, Nylon", Types 4 & 5 that utilizes 500 Denier Textured Nylon yarns with a polyurethane ba ...

    SBIR Phase I 2012 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government