List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT CORPORATION            Topic: A17003

    Sentient Corporation proposes to integrate its DigitalClone Component (DCC) physics-based modeling technology and Johns Hopkins University Applied Physics Laboratorys in-situ thermal sensors to develop a comprehensive sensor-based tool to monitor, identify and locate defects in metallic additive manufacturing, and create a DCC model-enabled feedback loop to correct the process-induced defects to i ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Enhanced Processing of Green Solvents

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: B

    Solvents are a valuable processing tool in the chemical and related industries. Solvent are used to enhance mass transfer, heat transfer and in most cases are a processing aid and eventually are not used in the final product but to enhance the fabrication of the final product. While solvents are very valuable, they also cause a significant problem with their volatility and associated emissions. ...

    SBIR Phase I 2013 Environmental Protection Agency
  6. A New Standard for Power-Aware Programming

    SBC: EM PHOTONICS INC            Topic: A13029

    New enhancements to mobile computers including smaller sensors, displays and powerful processors have made them much more attractive for the battlefield, not only as wearable systems for soldiers, but also unattended ground sensors a warfighter can leave behind for situational awareness. Unfortunately, while the technologies for hands-free interfacing have improved greatly, the challenge of limiti ...

    SBIR Phase I 2013 Department of DefenseArmy
  7. Advanced Spectrally Selective Materials for Obscurant Applications

    SBC: LUMILANT, INC.            Topic: A13AT016

    As infrared (IR) electo-optical sensors improve in both availability and quality a strong need exists to have comparable improvements in the performance of military obscurants within the IR band. Conventional approaches for creating effective IR obscurants have relied primarily on shaped metal particles with high aspect ratios (e.g. rods, flakes). While efficient it is difficult to create very ...

    STTR Phase I 2013 Department of DefenseArmy
  8. Electro-Optically Guided Radar Imaging

    SBC: Phase Sensitive Innovations, Inc.            Topic: A13040

    Millimeter-wave RADAR imaging holds significant promise for many applications from rotorcraft DVE mitigation to standoff security screening. A key challenge of this imaging modality, however, has been the implementation of an effective method for creating an image without relying on either mechanical scanning or expensive, high SWAP phased array techniques. Herein, we present a concept for creat ...

    SBIR Phase I 2013 Department of DefenseArmy
  9. Innovative Real Time Probes for Plastic Bonded Exp

    SBC: ALPHASENSE, INC.            Topic: A09026

    In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

    SBIR Phase I 2009 Department of DefenseArmy
  10. Nano-Passivation of GaSb/InAs Strained Layer Superlattices Infrared Detector

    SBC: B & W Tek Inc.            Topic: A08103

    Mid-infrared (MWIR, wavelength ~10 micron) imaging has significant importance in military surveillance and target recognition, since human body radiation peaks in MWIR. The GaSb/InAs type-II Strained Layer Superlattice (SLS) MWIR detector has been under intensive investigation recently. While much progress has been made to enhance wavelength coverage, one of the few remaining issues has been its r ...

    SBIR Phase I 2009 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government