You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Feasibility of rPET Lignin-Content Polylols for Significant Reduction of Halogenated Flame Retardant in Construction Spray Foam

    SBC: Resinate Materials Group, Inc.            Topic: 17NCER6A

    This EPA SBIR Phase I Research and Development proposal will demonstrate feasibility of reduction in halogenated flame retardant use in polyisocyanurate foams prepared from lignincontent rPET polyols. The study will show whether or not the lignin rPET polyol formulations meet ASTM flame retardancy standards and thus reduce or eliminate the need for halogenated fire retardants (HFRs) in spray foams ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Use of Augmented Reality in Experimentation with New Equipment Training for Electro-Optic Infrared (EOIR) Sensors

    SBC: Signature Research, Inc.            Topic: A16041

    We propose to develop and demonstrate reliable, robust and effective methods for presenting and evaluating the combined effects of augmented reality and appropriate EO/IR sensor imagery on human-in-the-loop psycho-physical perception. The augmented reality metrics and test methodology, test imagery, and software developed along with proof-of-principle testing conducted in Phase I provide a foundat ...

    SBIR Phase II 2018 Department of DefenseArmy
  4. Innovative Rendering for Simulation

    SBC: Signature Research, Inc.            Topic: A16105

    The focus of the Innovative Rendering for Simulation Phase II effort is to implement the proof-of-concept Unified Physics-based Rendering System (UPRS) in order to deliver new capabilities to the modeling and simulation community.UPRS will provide the government with a tailored HW and SW solution optimized for the specific simulation rendering needs.UPRS will be delivered as a Government Open Sour ...

    SBIR Phase II 2018 Department of DefenseArmy
  5. Method for Locally Measuring Strength of a Polymer-Inorganic Interface During Cure and Aging

    SBC: METNA CO            Topic: A17AT016

    The NMR relaxometry instrument developed in Phase I project will be refined and thoroughly calibrated for nondestructive evaluation of the structure and properties of polymer-inorganic interfaces. The system design, operation conditions and data acquisition/analysis algorithms will be improved for precise and reliable evaluation of the structure and properties of the interfaces formed between dive ...

    STTR Phase II 2018 Department of DefenseArmy
  6. Continuous Pavement Deflection Measurement System for Road and Airfield Pavements

    SBC: GS Engineering Services, Inc.            Topic: A17061

    Pavement Management Systems are not typically a priority in host nation day-to-day operations so the exact loads and pavement conditions are not known prior to deployment. Pavement Performance data can identify how well the current infrastructure on the host nation runways and roadways can serve the Military operations prior to a catastrophic event. There are five main pavement performance related ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Development of a Turbocharger for Small Aviation Diesel Engines

    SBC: BAKER ENGINEERING, LLC            Topic: A18019

    Baker Engineering Inc. (BEI) proposes researching and developing a reliable sequential turbocharger system for a typical 2.0l class aviation compression-ignition engine with a maximum power of 180hp at sea level which is capable of providing 108hp at an altitude of 30,000-ft. With emphasis on durability and performance at altitude, research will be conducted on turbocharger construction, bearing s ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. SMALL CALIBER MUNITIONS MANEUVERING USING PIEZO-ACTUATED COMPLIANT MECHANISMS

    SBC: Flexsys, Inc.            Topic: A18028

    Controlled guidance of small-caliber gun-fired munitions is currently limited by the severity of inertial loads from the launch event, which can be 60,000g in small-caliber munitions. There is a need for more robust mechanical guidance-control systems in small-caliber munitions that can provide substantial control authority while being able to survive extreme launch loads.Compliant mechanisms, act ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government