List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Feasibility of rPET Lignin-Content Polylols for Significant Reduction of Halogenated Flame Retardant in Construction Spray Foam

    SBC: Resinate Materials Group, Inc.            Topic: 17NCER6A

    This EPA SBIR Phase I Research and Development proposal will demonstrate feasibility of reduction in halogenated flame retardant use in polyisocyanurate foams prepared from lignincontent rPET polyols. The study will show whether or not the lignin rPET polyol formulations meet ASTM flame retardancy standards and thus reduce or eliminate the need for halogenated fire retardants (HFRs) in spray foams ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Indoor Formaldehyde Detection by a Low-Cost Chemical Sensor Based on Organic Nanofibers

    SBC: Vaporsens, Inc.            Topic: 16NCER1A

    Need: People are exposed to formaldehyde, a carcinogen found in building materials. Highly sensitive, real-time formaldehyde sensors would improve human safety by alerting users to harmful concentrations. _x000D_ _x000D_ Technical Feasibility: Vaporsens produces chemical sensors based on novel organic nanofiber technology. Phase 1 results demonstrated high selectivity, rapid-response time, and dem ...

    SBIR Phase II 2018 Environmental Protection Agency
  4. In Vehicle Adjustable Torsion Bar Technologies

    SBC: GS Engineering Inc.            Topic: A17146

    In order to provide a best of both world solution to the Army which provides the simplicity, reliability and cost effectiveness of a torsion bar suspension system with the flexibility and adjustment of a more costly and complex HSU system, GS Engineering will develop an in-vehicle torsion bar adjustment device.Leveraging decades of military tracked vehicle suspension expertise and starting with th ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Combat Casualty Care Augmented Reality Intelligent Training Systems (C3ARESYS)

    SBC: Soar Technology, Inc.            Topic: A16076

    Combat Lifesavers (CLS) and Combat Medics (68W) are the first responders of the battlefield, and their training and skill maintenance is extremely important to the military. Scenario-based training is limited in how casualties and wounds are presented to trainees, and the amount of hands-on experience that trainees can get in the schoolhouse. Typically wounds are created using simple moulage that ...

    SBIR Phase II 2018 Department of DefenseArmy
  6. Use of Augmented Reality in Experimentation with New Equipment Training for Electro-Optic Infrared (EOIR) Sensors

    SBC: Signature Research, Inc.            Topic: A16041

    We propose to develop and demonstrate reliable, robust and effective methods for presenting and evaluating the combined effects of augmented reality and appropriate EO/IR sensor imagery on human-in-the-loop psycho-physical perception. The augmented reality metrics and test methodology, test imagery, and software developed along with proof-of-principle testing conducted in Phase I provide a foundat ...

    SBIR Phase II 2018 Department of DefenseArmy
  7. Innovative Rendering for Simulation

    SBC: Signature Research, Inc.            Topic: A16105

    The focus of the Innovative Rendering for Simulation Phase II effort is to implement the proof-of-concept Unified Physics-based Rendering System (UPRS) in order to deliver new capabilities to the modeling and simulation community.UPRS will provide the government with a tailored HW and SW solution optimized for the specific simulation rendering needs.UPRS will be delivered as a Government Open Sour ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. Explainable AI to support Veterans Transition Assistance Programs (XAI-VTAP)

    SBC: Soar Technology, Inc.            Topic: SB163007

    A challenge for Artificial Intelligence recommenders is explaining their reasoning to users. Humans tend to explain concepts with symbolic narratives, which contrasts the way non-symbolic machine learning represents concepts. This research addresses this challenge by grounding the research in the problem of helping transitioning veterans find relevant careers. The developed prototype will provide ...

    SBIR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  9. Scalable Manufacturing of Graphite Yarn via Wet Spinning Process

    SBC: STORAGENERGY TECHNOLOGIES, INC.            Topic: A17AT013

    Scalable, inexpensive manufacturing processes that produce yarns capable of storing energy are required for new breakthroughs within the wearable electronics sector. To enable to further improve the properties of yarn-based electrochemical performance in energy-storage systems, fiber-based yarns are proposed and developed via a scalable and cost effective wet spinning manufacturing process, and la ...

    STTR Phase II 2018 Department of DefenseArmy
  10. Engineered Strain for Bioconversion of Food Waste to Fuels

    SBC: Technology Holding, LLC            Topic: A17AT011

    The strain engineering effort will constitute development of a synthetic biology toolkit applicable for food waste conversion in clostridium. The engineered strain will enable high efficiency conversion of army food waste to fuel. The proposed project will scale up a clostridium based fermentation method to produce fuel from food waste. A batch reactor will be optimized. Overall techno-economic fe ...

    STTR Phase II 2018 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government