You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Method for Locally Measuring Strength of a Polymer-Inorganic Interface During Cure and Aging

    SBC: METNA CO            Topic: A17AT016

    The NMR relaxometry instrument developed in Phase I project will be refined and thoroughly calibrated for nondestructive evaluation of the structure and properties of polymer-inorganic interfaces. The system design, operation conditions and data acquisition/analysis algorithms will be improved for precise and reliable evaluation of the structure and properties of the interfaces formed between dive ...

    STTR Phase II 2018 Department of DefenseArmy
  2. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Feasibility of rPET Lignin-Content Polylols for Significant Reduction of Halogenated Flame Retardant in Construction Spray Foam

    SBC: Resinate Materials Group, Inc.            Topic: 17NCER6A

    This EPA SBIR Phase I Research and Development proposal will demonstrate feasibility of reduction in halogenated flame retardant use in polyisocyanurate foams prepared from lignincontent rPET polyols. The study will show whether or not the lignin rPET polyol formulations meet ASTM flame retardancy standards and thus reduce or eliminate the need for halogenated fire retardants (HFRs) in spray foams ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Bridge Launch Technology for Ultra Lightweight Combat Vehicles

    SBC: GS ENGINEERING INC            Topic: A17105

    The need for lightweight vehicles that are able to be quickly and efficiently deployed has been identified in recent years as potential theatres emerge with the evolution of crisis and conflict in the world. . In order to be effective and useful, the gap-crossing/ bridging system for Ultra Lightweight Combat Vehicles must be matched to the vehicle not only in capacity, but also in transportability ...

    SBIR Phase II 2018 Department of DefenseArmy
  5. Magnetic Pulse Welder for In-Field Repair of Non-Weldable Aluminum Alloys

    SBC: GRID LOGIC INCORPORATED            Topic: A17090

    The U.S. Army wishes to use new aluminum alloy components in next generation vehicles to reduce weight and improve ballistic protection performance. While such components can be fabricated, the Army has not adopted their use because adequate welding technology does not exist for repair in the field. The objective of the R&D in this SBIR is to develop a new type of portable welder capable of perfor ...

    SBIR Phase II 2018 Department of DefenseArmy
  6. HPC enabled FDTD Channel Modeling for Dense Urban Scenes in the HF/VHF Band

    SBC: EMAG TECHNOLOGIES, INC.            Topic: A17024

    The objective of this Small Business Innovation Research (SBIR) project is to develop a comprehensive modeling environment for the accurate study of propagation channels and development of communication systems with particular emphasis on the HF/VHF frequency bands. The proposed software will provide accurate solutions based on full-wave modeling of the scene as well as a high degree of computatio ...

    SBIR Phase II 2018 Department of DefenseArmy
  7. Lithium Ion Battery Electrodes Manufacturing to Improve Power and Energy Performance

    SBC: Navitas Advanced Solutions Group, LLC            Topic: A17020

    Navitas proposes a novel approach to produce high energy, high power lithium batteries. Our innovative approach produces multilayer electrodes with gradient pore structure throughout the thickness of the electrode. Phase I results showed that the graded electrode structure enhanced lithium ion transport. The innovative electrodes were fabricated using water-based coating process. Phase I individua ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. Air Platform Passive Occupant Protection

    SBC: GS ENGINEERING INC            Topic: A18001

    Seated aircrew members rely on their five-point harnesses to position their bodies correctly within their seats in order to provide the best chance of survivability during a rapid deceleration event. The current system requires the user to adjust each of five straps manually in order to correctly position the central rotary buckle in such a way to minimize potential internal injuries. For a variet ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Development of a Turbocharger for Small Aviation Diesel Engines

    SBC: BAKER ENGINEERING, LLC            Topic: A18019

    Baker Engineering Inc. (BEI) proposes researching and developing a reliable sequential turbocharger system for a typical 2.0l class aviation compression-ignition engine with a maximum power of 180hp at sea level which is capable of providing 108hp at an altitude of 30,000-ft. With emphasis on durability and performance at altitude, research will be conducted on turbocharger construction, bearing s ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government