You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Wideband Sub-Array Digital Receiver Exciter (DREX)

    SBC: Applied Radar, Inc.            Topic: MDA08028

    Applied Radar has developed a multi-channel wideband digital receiver/exciter (DREX) module denoted as the Single Channel Open Architecture Receiver Exciter (SCORE-X750) which operates at X-band (tunable over 812 GHz) with 750 MHz of instantaneous bandwidth. This DREX module is designed for ground-based radars and can be used in new designs or in retrofit and modernization of existing radars. The ...

    SBIR Phase II 2015 Department of DefenseMissile Defense Agency
  2. Hybrid Laser Arc Welding for Thick Plate High Performance Steels

    SBC: TECHKNOWSERV CORP            Topic: 132FH1

    Welding of HPS70W is well understood when using submerged arc welding (SAW) and shielded metal arc welding (SMAW) techniques. A Welding Advisory Group (WAG) which consisted of technical advisors from the Navy, AISI, and FHWA, major filler metal manufacturers, and steel producers determined the guidelines for welding HPS70W. As a result, comprehensive guidelines and welding procedures exist for SAW ...

    SBIR Phase II 2015 Department of Transportation
  3. Process Optimization of Needled Carbon/ silica carbide (C/SiC) Structural Insulators

    SBC: MATERIALS RESEARCH & DESIGN INC            Topic: MDA13025

    Some missiles employ a throttleable divert and altitude control system (TDACS) to maneuver the kill vehicle to the target. Hot gas valve components in the TDACS must survive long burn times at high pressures and high temperatures. Recently the team of Materials Research & Design (MR&D), Allcomp, and Southern Research Institute (SoRI) has developed a needled C/SiC composite that exhibits strength ...

    SBIR Phase II 2015 Department of DefenseMissile Defense Agency
  4. Gallium Arsenide (GaAs)- Superlattice Light Emitting Diode Arrays (SLEDS)

    SBC: Chip Design Systems Inc.            Topic: MDA13017

    We propose to monolithically integrate an infrared light emitting diode (IRLED) array on the backside of a GaAs substrate whose frontside contains an array of driver circuits. We will develop smaller GaAs substrate via technology to enable smaller pixel pitch and realize a large-scale GaAs-SLEDS read-in integrated circuit (RIIC). Our team consists of experts in IRLED fabrication, RIIC design, Ga ...

    SBIR Phase II 2015 Department of DefenseMissile Defense Agency
  5. Whimbrel Unmanned Aircraft System-Borne Atmospheric and Sea Surface Temperature (SST) Sensor

    SBC: PIASECKI AIRCRAFT CORP            Topic: 845RWP

    Piasecki Aircraft (PiAC) proposes to continue development and testing efforts of the Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel USA has been developed to support the Tropical Cyclone Boundary Layer mission requirements and contains sensors an ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Individualized Fatigue Management Program Technology for Trucking Operations

    SBC: PULSAR INFORMATICS, INC.            Topic: 091FM1

    This proposal leverages our current DOT-funded SBIR Phase II project developing software to assist truck drivers and companies to fatigue optimize driver scheduling and route planning. This project will build a set of web-services specially designed to provide objective quantitative feedback to truck drivers, dispatchers, and safety managers about fatigue from fatigue stressors common in trucking ...

    SBIR Phase II 2015 Department of Transportation
  7. Miniaturization of Thermoacoustic Expander for 50 mW Recuperative Coolers Run Below 40 K

    SBC: CRYOWAVE ADVANCED TECHNOLGIES INC            Topic: MDA06023

    The objective of this project is to develop a novel expander that can increase the efficiency of cryocoolers for IR sensors at very low temperatures and in remote cooling and across gimbal applications. Miniature Thermoacoustic Expanders (MTAE) that employ high energy acoustic waves generated with no moving parts at the cold expander to produce efficient cooling over a wide range of temperatures a ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  8. Optimal Sensor Scheduling for Ballistic Missile Defense

    SBC: DANIEL H WAGNER ASSOCIATES INC            Topic: MDA06009

    Our Phase I research involved the development of an innovative sensor scheduling algorithm in support of Ballistic Missile Defense. This algorithm schedules multiple diverse and distributed sensors to perform time-critical tasks relating to multiple moving targets; specifically, to detect, classify, localize, track, support the interception of, and conduct BDA for ballistic missiles throughout t ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  9. Safe High Power (High Rate) Lithium Battery for MKV (Missiles) with Long storage Life

    SBC: LithChem Energy / Div. of TOXCO, inc.            Topic: MDA06026

    r

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  10. IM Modeling/Simulation Tool for KEI Dynamic/Thermal Loads Associated with Stage Separation

    SBC: COMBUSTION RESEARCH & FLOW TECHNOLOGY INC            Topic: MDA06041

    Intense dynamic and thermal loads will occur during stage-separation events that are of major concern from both operational and safety viewpoints. The insensitive-munitions (IM) stimuli and thermal/dynamic response associated with such events has received very little attention, yet this is of major concern for the KEI vehicle undergoing Stage 1 to Stage 2 separation. The KEI event is at lower alti ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government