You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Hybrid Laser Arc Welding for Thick Plate High Performance Steels

    SBC: TECHKNOWSERV CORP            Topic: 132FH1

    Welding of HPS70W is well understood when using submerged arc welding (SAW) and shielded metal arc welding (SMAW) techniques. A Welding Advisory Group (WAG) which consisted of technical advisors from the Navy, AISI, and FHWA, major filler metal manufacturers, and steel producers determined the guidelines for welding HPS70W. As a result, comprehensive guidelines and welding procedures exist for SAW ...

    SBIR Phase II 2015 Department of Transportation
  2. Environmental Control Unit with Integrated Thermal Storage

    SBC: Advanced Cooling Technologies, Inc.            Topic: OSD13EP1

    Military Environmental Control Units (ECUs) represent one of the dominant energy users in forward operating environments, and significant effort is being made to improving overall ECU efficiency [1]. Reducing overall Size, Weight and Power (SWaP) of military ECUs is complicated by the transient, yet predictable, nature of the thermal demand profile over the course of a typical daily usage cycle, ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  3. BLAST: A System for Bandwidth- and Latency-Scalable Teleoperation

    SBC: Neya Systems, LLC            Topic: OSD13HS3

    This topic addresses the problem of robustly commanding and controlling unmanned ground vehicles operating in complex, unstructured environments. Current approaches to this task rely on dense scene reconstruction from a variety of sensor data such as LIDAR and video imagery. Scene representations are then relayed to a remote human operator who provides commands at varying levels of supervisory con ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  4. Stress Testing Robustness to Exceptional Situations in Simulation

    SBC: Edge Case Research, Inc.            Topic: OSD141AU4

    Recent advancements in sensor simulation tools [2] have improved our ability to model radar, lidar, camera, and GPS with software/hardware in the loop. Of course, our ability to model the physics of heavy trucks [3] is quite mature as well. To address the challenge of developing the STE, we will provide our autonomy algorithms as Government Furnished Equipment (GFE). The focus of this topic ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  5. Whimbrel Unmanned Aircraft System-Borne Atmospheric and Sea Surface Temperature (SST) Sensor

    SBC: Piasecki Aircraft Corporation            Topic: 845RWP

    Piasecki Aircraft (PiAC) proposes to continue development and testing efforts of the Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel USA has been developed to support the Tropical Cyclone Boundary Layer mission requirements and contains sensors an ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Individualized Fatigue Management Program Technology for Trucking Operations

    SBC: PULSAR INFORMATICS, INC.            Topic: 091FM1

    This proposal leverages our current DOT-funded SBIR Phase II project developing software to assist truck drivers and companies to fatigue optimize driver scheduling and route planning. This project will build a set of web-services specially designed to provide objective quantitative feedback to truck drivers, dispatchers, and safety managers about fatigue from fatigue stressors common in trucking ...

    SBIR Phase II 2015 Department of Transportation
  7. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  8. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  9. Video/Imagery Super-Parallel and Supercomputer-Path (VISPII) Stand-Alone Hardware Compression

    SBC: CHI Systems, Inc.            Topic: N/A

    This research is aimed at developing a dialogue-based intelligent tutoring system, called Automated Tutoring Environment for Command or ATEC, to provide deliberate practice designed to improve battlefield command reasoning. It automates the Army ResearchInstitute classroom training program, Think Like a Commander (TLAC), through use of a dialogue management capability from the AutoTutor system, ...

    SBIR Phase II 2001 Department of DefenseOffice of the Secretary of Defense
  10. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
US Flag An Official Website of the United States Government