Award Data

ABSTRACT:In this phase II effort we will commercialize the high speed, high power, modified uni-traveling carrier (MUTC) photodiodes (PDs). To this end, we will develop reliable packaging solutions for discrete PDs, PD arrays, balanced PDs and waveguide based PDs. We will also transition the chip fabrication process for continuous, high volume supply of quality MUTC PD chips. In the first six mont ...

ABSTRACT:Specialty elastomers, such as hydrogenated acrylonitrile-butadiene rubber (HNBR) and fluoroelastomer (FKM), are widely utilized as high performance seals in numerous aerospace vehicles and components. The elastomer sealing industry and its products are primarily based on a limited pool of feedstocks that were last advanced in the 1970's. Using current technology, elastomeric seals must b ...

ABSTRACT: there is a clear need for a radically new interconnect architecture that minimizes the routing delay through the backplane to enable increased performance, reduced costs, and faster time to market. To this end, we propose the development of a space compatible optically interconnected backplane with reconfigurable routing fabric. By removing the electrical interconnections between logi ...

Based on multiple technology platforms and theoretical analyses, in the Phase I program we have demonstrated the feasibility that RF polymers with desirable high frequency properties can be achieved. Following Edison¡¯s model of product and process development for technology innovations, Phase-II will pursue further incremental improvement in material properties upon the concept-proving materi ...

FPGAs have attracted a great deal of attention over the past decade because of their performance, scalability, and cost relative to traditional hardware platforms. However, one of the most significant disadvantages of FPGAs is based on the underlying architecture on which they are built. Specifically, routing delay through the chip is one of the largest bottlenecks in developing FPGA-based appli ...

Based on multiple technology platforms, innovative nanomaterials with much improved magnetodielectric properties have been developed in the Phase I program. Following Edison’s model of product and process development for technology innovations, Phase-II will pursue further incremental improvement in material properties upon the concept-proving material platforms to achieve high and matched die ...

Scheduling is a complex, NP-hard problem that challenges the use of any single solution technique. In Phase I, we built a model that uses our multi-technique Quantum Leap Problem Solving Engine to solve a representative but simplified version of the AirForce Satellite Control Network (AFSCN) contact scheduling problem. The system demonstrated that it could schedule the hundreds (500 to 600) of t ...