You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Advanced Green Micropropulsion System

    SBC: Systima Technologies, Inc.            Topic: T201

    Systima in collaboration with University of Washington is developing a high performance injection system for advanced green monopropellant AF-M315E micropropulsion systems (0.1 – 1.0 N) for small- and micro-satellites and cubesats (100 kg-500 kg and

    STTR Phase II 2014 National Aeronautics and Space Administration
  2. Ultra High Temperature Refractory Materials

    SBC: ADVANCED CERAMICS MANUFACTURING, LLC            Topic: T1001

    Legacy refractory materials that have origins dating to the original Saturn program are commonly used in current launch facilities. Although they fail to meet the target requirements, they are the only approved material. Our research team has demonstrated a baseline system during the Phase I effort that combines a non-cement binder, a high temperature macro aggregate, and reactive nano aggregates ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  3. Dynamic Frequency Passive Millemeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: 94

    Passive microwave sensors aboard satellites provide valuable information regarding weather conditions by measuring atmospheric attenuation over a broad range of frequencies from 0-200 GHz. Additional ground-based sensors are desirable to provide complementary upward looking measurements that can be used to refine existing attenuation models. Operating over such a large bandwidth, however, places ...

    SBIR Phase II 2014 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Innovative Structural and Material Concepts for Low-Weight Low-Drag Aircraft Design

    SBC: Zona Technology, Inc            Topic: A301

    The overall technical objective of this multi-phase project is to develop and validate a so-called 'AAW-Process' that consists of (i) the Active Aeroelastic Wing (AAW) technology of employing multiple control surfaces in tandem for achieving loads alleviation and drag minimization using the over-determined trim capability of ZONA Euler Unsteady Solver (ZEUS), and (ii) the aeroelastic tailoring tec ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  5. Navsonde Atmospheric Sampler

    SBC: L3 Latitude, LLC            Topic: S305

    The proposed innovation is a low-cost, retrievable and reusable, autonomously guided dropsonde capable of deploying from a host aircraft and performing in-situ atmospheric measurements. We have decided to name this platform the NavSonde−an autonomously navigable sonde-glider. The proposed effort focuses on the engineering work involved with the retrieval of high altitude volcanic ash plume samp ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  6. Atmospheric Lidar with Cross-Track Scanning

    SBC: LITESPAR, INC.            Topic: E301

    An eye-safe, multispectral cross-track scan subsystem with a large receiver aperture and a narrow FOV is proposed for the NASA Cloud Physics Lidar (CPL) to increase the horizontal scan area coverage. The /-14 degree cross-track scan capability will cover /- 5 km from nadir at a 20 km altitude. The cross-track scanner uses a bidirectional scan pattern, which collects 10,000 data points per cross ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  7. TRUSSELATOR- On-Orbit Fabrication of High Performance Support Structures for Solar Arrays

    SBC: TETHERS UNLIMITED, INC.            Topic: H501

    The Trusselator technology will enable on-orbit fabrication of support structures for high-power solar arrays and large antennas, achieving order-of-magnitude improvements in packing efficiency and launch mass while reducing life-cycle cost. The Phase I Trusselator effort successfully demonstrated fabrication of continuous lengths of high-performance carbon fiber truss using a novel additive manu ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  8. Energy-Deposition to Reduce Skin Friction in Supersonic Applications

    SBC: Physics, Materials, and Applied Mathematics Research L.L.C.            Topic: A304

    NASA has drawn attention to an impending need to improve energy-efficiency in low supersonic (M

    SBIR Phase II 2014 National Aeronautics and Space Administration
  9. Low Cost Method of Manufacturing Space Optics

    SBC: Ormond, LLC            Topic: S204

    The Phase I project successfully demonstrated the feasibility of developing a technology that will reduce cost and manufacturing time, broaden design options, and improve performance of large space optics. Primarily addressed is light weighting ULE glass mirrors for large telescope systems. While milling and cutting materials such as ULE or SiC is often performed at Ormond using a novel abras ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  10. High Performance Plasma Channel Insulators for High Power Hall Thrusters

    SBC: SIENNA TECHNOLOGIES, INC.            Topic: S303

    NASA missions for planetary exploration require high power, long-life Hall thrusters. However, thruster power and lifetime are limited by the erosion of plasma channel walls. Current plasma channel insulators, BN or Borosil, have the required low secondary electron emission (SEE) but are susceptible to xenon plasma erosion. AlN has exceptionally high plasma erosion resistance but suffers from hig ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government