You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. HARV/LRF: Head-Aimed Remote Vision System for Surveillance and Targeting

    SBC: CHATTEN ASSOC., INC.            Topic: A07044

    This proposal addresses the need for a smart, network-compatible, enhanced head-aimed video sensor system to enable geo-location and target hand-off from robotic platforms. The sensor system provides enhanced remote situational awareness, with specific features aimed towards reconnaissance and surveillance, and target identification and designation missions. This same sensor is also applicable t ...

    SBIR Phase II 2008 Department of DefenseArmy
  2. High Sensitivity Rugged Array Detectors for Field Deployed Instruments: Low-Light Level Camera for Laser-Induced Breakdown Spectroscopy (LIBS) and Ram

    SBC: B & W Tek Inc.            Topic: A06065

    Laser-induced breakdown spectroscopy (LIBS) and Raman spectroscopy are developing rapidly for chemical and biochemical sensing applications. There is an urgent need for high-sensitivity detectors so as to minimize sample quantity and maximize detection range from the source. In most field-deployable spectrometers, a photo-detector array is used for analyzing the spectral contents. The sensitivitie ...

    SBIR Phase II 2008 Department of DefenseArmy
  3. Modeling Culturally Accurate Behavior via Multiplayer Game Environments

    SBC: CHI Systems, Inc.            Topic: OSD06CR2

    Military simulations involving non-player characters (NPCs) representing non-US cultures are becoming increasingly important for training and mission rehearsal. However, creating culturally-realistic behaviors for these characters remains a technical challenge due to the lack of a clear standard or process for creating behaviors that are consistent with a given culture. This effort proposes a so ...

    SBIR Phase II 2008 Department of DefenseArmy
  4. Computational Fluid Dynamics Modeling for Electrically Conducting Flows

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: A06018

    A unified comprehensive framework that incorporates Maxwell’s equations coupled with the 3D unsteady Navier-Stokes equations of fluid mechanics, is being developed utilizing an innovative Multi-Physics Simulation (MPS) Architecture, for conducting multi-disciplinary simulations. The MPS Architecture can be used for analysis of problems where the dominant physical mechanisms are strongly influenc ...

    SBIR Phase II 2008 Department of DefenseArmy
  5. Missile/UAV Dispense Interference Modeling

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: A07029

    The innovation proposed is the development of a high-fidelity software tool to be used for the design of hypersonic UAV dispense and subsequent dispense and dispersion of small hardened projectiles (SHAPs) from the UAVs using blast-based concepts. Such dispersed kinetic energy concepts can be effective against maneuverable and depressed trajectory threats for which conventional interceptors would ...

    SBIR Phase II 2008 Department of DefenseArmy
  6. UAV – Combat Medic Collaboration for Resupply & Evacuation

    SBC: DRAGONFLY PICTURES, INC.            Topic: OSD06UM8

    For the Phase II SBIR, DPI is proposing a series of demonstrations that focus on autonomy technologies required to make the UAS simple to operate and effective for autonomous flight operations including obstacle avoidance, takeoff and landing. The autonomy selected will support autonomous takeoff, landing and site selection. The specific technology that we are proposing to integrate is the followi ...

    SBIR Phase II 2008 Department of DefenseArmy
  7. Non-Energetics-Based Self-Destruct Mechanisms

    SBC: Qortek, Inc.            Topic: OSD05A12

    The Phase II program continues a highly successful Phase I, where a silent, unobservable, non-energetic means directly incorporated within electronics completely obliterate IC die within microseconds. The destruct is so extensive as to deny, even with the most sophisticated reverse engineer techniques, ability to derive any information about the chip or its functions. Phase II effort focus is on ...

    SBIR Phase II 2008 Department of DefenseArmy
  8. Innovative Rotor Blade Anti-Icing/De-Icing Technologies

    SBC: Fbs, Inc.            Topic: A07007

    FBS, Inc. and The Pennsylvania State Vertical Lift Research Center of Excellence (VLRCOE), during Phase I of its Army Phase I SBIR contract, demonstrated improved ultrasonic deicing/anti-icing performance using a novel ultrasonic focusing technique. The resulting technology has shown great potential for providing a low-power, light-weight alternative to thermal-based ice protection systems curren ...

    SBIR Phase II 2008 Department of DefenseArmy
  9. Warhead Adaptive Materials (WAM) for Military Operations in Urban Terrain (MOUT)

    SBC: GENERAL SCIENCES INC            Topic: A07065

    The U.S. Army, as well as other national military services, requires new and innovative energetic materials to produce next generation munitions. There exists a need for adaptable warheads that provide user-selectable energy output, as well as selectable modes of operation, such as fragmentation, penetration and blast. General Sciences, Inc. (GSI) will demonstrate the feasibility of applying energ ...

    SBIR Phase II 2008 Department of DefenseArmy
  10. Multi-functional Polymers for Composite Structures (MSC P7011)

    SBC: Materials Sciences LLC            Topic: A06027

    Conventional approaches to developing Insensitive Munitions (IM) solutions for composite rocket motor cases have involved the development of improved energetic material formulations combined with various techniques to achieve venting of the composite case structure prior to propellant ignition and catastrophic failure of the motor. Such approaches have achieved some degree of success in enhancing ...

    SBIR Phase II 2008 Department of DefenseArmy
US Flag An Official Website of the United States Government