You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High-Power 2 Micron Fiber Lasers

    SBC: ADVALUE TECHNOLOGY LLC            Topic: AF071137

    Thulium doped fiber laser near 2 micron is of great interest because of the potential possibility of combining high efficiency, high output power, and retina safety together. This proposal is for the development of new Tm-doped glass fiber for efficient high power 2ƒnmicron fiber laser capable of generating an output power of up to thousands watts. The doping concentration of the proposed glass f ...

    SBIR Phase II 2008 Department of DefenseAir Force
  2. SWAP/VAWCS, A Voice Authenticated Wireless Communication System that Uses an Innovative Adaptive communications Protocol

    SBC: BLACK & RYAN ENGINEERING            Topic: N/A

    With the advent of satellite telephone services, it is now feasible to provide secure voice communication to any location on Earth. In a Phase I SBIR for AFRL, Black & Ryan Engineering (BRE) developed VAWCS (Voice Authenticated Wireless CommunicationSystem), a computer model of a Communications Waveform, combining Voice Authentication, Speech Compression, Encryption, and Forward Error Correction ...

    SBIR Phase II 2001 Department of DefenseAir Force
  3. Automated Analysis of Datalink Transmissions (AADT)

    SBC: DataSoft Corp.            Topic: AF06317

    The focus of the Phase II of this SBIR topic is to build a prototype of an automated tool for collecting and analyzing over-the-air data in a JTRS test environment. The tool will provide Automated Analysis of Data link Transmissions (AADT) where a single JTRS terminal may be part of one or more JTRS networks. In the JTRS environment, the possibility exists for a single terminal to be connected to ...

    SBIR Phase II 2008 Department of DefenseAir Force
  4. End-to-End Performance Management for RF Networks

    SBC: DataSoft Corp.            Topic: AF071072

    The needs of the future Airborne Network present unique challenges for performance monitoring, beyond the capabilities of conventional approaches: a fast-moving, dynamically adapting, heterogeneous RF network in need of real-time, end-to-end performance monitoring. We propose to research and develop innovative approaches that will help to ensure high quality performance throughout the Airborne Net ...

    SBIR Phase II 2008 Department of DefenseAir Force
  5. ATC Position Reports for Unmanned Aircraft (UA)

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: AF071063

    For Phase II, Kutta leverages its experience in developing Federal Aviation Administration (FAA) flight certifiable software and hardware to build an Air Traffic Control Reporting Schema (ATC-RS) solution. The resulting product provides real-time UAS position reports on the battlefield and in the National Airspace (NAS). The innovative ATC-RS product will assist the Air Force in increasing airspac ...

    SBIR Phase II 2008 Department of DefenseAir Force
  6. EROSION RESISTANT CERAMIC COMPOSITE CONDUCTIVE RAIL

    SBC: ATS-MER, LLC            Topic: N/A

    HYPERVELOCITY LAUNCHER SYSTEMS PLACE SEVERE DEMANDS ON BOTH THE INSULATOR AND CONDUCTIVE RAILS. RECENTLY A WHISKER REINFORCED ALUMINA INSULATOR RAIL SHOWED SUPERIOR EROSION PERFORMANCE IN RAIL GUN TEST, HOWEVER, THE CONDUCTIVE COPPER RAILS ERODED SEVERELY AS WELL AS CREATE AN ANTICIPATED EXPANSION PROBLEM IN FULL SCALE SYSTEMS. IT IS ANTICIPATED A CONDUCTIVE CERAMIC, TIB(2), COMPOSITE CAN PERFORM ...

    SBIR Phase II 1989 Department of DefenseAir Force
  7. Development of Light-Weight, Low-Cost Multichannels Catalytic Membrane Reformer

    SBC: ATS-MER, LLC            Topic: N/A

    The ability to reform battlefield fuels to highly enriched hydrogen gas would facilitate the use of fuel cells as an efficient electric generators for deployed forces. This SBIR Phase II program is focused on the optimization of highly efficient andcompact minireformers for this application. The steam reforming process, which allows higher yield of hydrogen in comparison to partial oxidation rea ...

    SBIR Phase II 2001 Department of DefenseAir Force
  8. Advanced Carbon Nanotubes- Based Polymer Matrix Composites for Satellites

    SBC: ATS-MER, LLC            Topic: AF063009

    The Phase I results have proven the feasibility of creating breakthrough polymer matrix composites (PMC) with high-loadings of well dispersed nanotubes in engineering polymer matrixes. The exceptional mechanical properties of the developed PMCs will be further improved in the Phase II effort by increasing the nanotube loading in the PMC to the packing limit, through optimizing the interface of the ...

    SBIR Phase II 2008 Department of DefenseAir Force
  9. Novel Field Programmable Technology based on Latching Micro-Electromagnetic Switches

    SBC: MICROLAB            Topic: N/A

    We propose to develop a new type of field-programmable logic device consisting of a custom ASIC chip and monolithically post-processed MEMS switches integrated with on-chip permanent magnets. The enabling components of this integrated microsystem are thenew MEMS switches demonstrated in Phase I with drastically reduced feature sizes. The main components of the Phase II work consist of optimizing ...

    SBIR Phase II 2001 Department of DefenseAir Force
  10. Energy Deposition to Sculpt Upstream Densities and Control Common Aerovehicle, Strongly Reducing Drag and Ablation

    SBC: Physics, Materials, and Applied Mathematics Research L.L.C.            Topic: AF071266

    A versatile technique will be applied to preferentially reduce drag on different CAV designs, serving as an innovative approach to control effectors. Once air is accelerated by a high speed vehicle, strong drag forces are generated which must be countered by control surfaces. This requires tremendous actuator force and ablation resistance by the surfaces. Our approach will control the distribution ...

    SBIR Phase II 2008 Department of DefenseAir Force
US Flag An Official Website of the United States Government