Award Data

The original Sublimator Driven Coldplate (SDC) design sought to provide significant mass savings over a traditional pumped fluid loop by combining the functions of a cold plate and a sublimator and eliminating the fluid loop (Leimkuehler, et. al., "Design of a Sublimator Driven Coldplate Development Unit," 2008-01-2169). The target application was to provide heat rejection for the ascent module of ...

We have developed a low dropout (LDO) regulator using a patented MESFET transistor technology that can be manufactured in commercial CMOS foundries with no changes to the process flow. The regulator is stable under all load conditions without an external compensation capacitor, thereby reducing the mass/volume of the power management system and increasing reliability. The MESFET-based LDO componen ...

In this SBIR project, AlphaSense, Inc. and the Carnegie Mellon University propose to develop a RF receiver front end based on CMOS-MEMS components for miniaturized digital EVA radio applications. In Phase I, we have proven the feasibility of implementing a compact, low power and high performance S band receiver front end based on CMOS- MEMS components. Specifically, we conducted link budget analys ...

ZONA Technology, Inc. (ZONA) proposes to develop an on-line flutter prediction tool using the parameter varying estimation (PVE) methodology, called the PVE Toolbox, to ensure the flight safety during the flight flutter test and to prevent the damage to the wind tunnel hardware from the structural failure of the flutter model during wind tunnel flutter test. This tool can be applied to rapidly ide ...

ZONA Technology, Inc. proposes to develop an integrated flight dynamics simulation capability with nonlinear aeroelastic interactions by combining a flight dynamics model and an add-on nonlinear aeroelastic solver in a Simulink environment. This nonlinear aeroelastic solver is generated by interacting a nonlinear structural Reduced Order Model (ROM) with a Neural-Network-based (NN-based) aerodyna ...

Oscilla Power, Inc. (OPI) is developing a utility-scale wave energy harvester that is enabled by low cost and readily-available magnetostrictive alloys. T his device, which utilizes no moving parts, has the potential to deliver predictable quantities of electric power to coastal utilities, industrial users, and remote facilities at costs competitive with coal or gas. The Phase I project demonstra ...

Ridgetop Group developed a top-level design of a rad-hard application-specific integrated circuit (ASIC) for spacecraft power management that is functional over a temperature range of -180 to +130oC. This ASIC is intended to work in conjunction with a fuel cell power system and battery backup to provide uninterrupted power to critical modules in space.Ridgetop has designed a novel integ ...

At the heart of scientific computing and numerical analysis are linear algebra solvers. In scientific computing, the focus is on the partial differential equations (PDEs) that arise from computational fluid dynamics (CFD), climate modeling, astrophysics, and structural and heat analysis that cannot be solved analytically. Certain problem formulations lead to sparse matrices, in which the majority ...

The motivation of the proposed SBIR is to develop, demonstrate and commercialize a compact, low-mass, high output power (1-10 milliwatt), tunable source of CW THz radiation operating at room temperature. The source will be useful both as a narrow band frequency stable sources for driving heterodyne receivers at key frequencies between 1 and 5 THz (1.4, 1.9, 2.7, 4.7 etc..) or for laboratory source ...

This proposal is for the development of an innovative, high power, and extremely reliable 1.26-micron Ho-doped fluoride fiber amplifier. The proposed fiber amplifier consists of a Ho-doped fluoride fiber pre-amplifier and power amplifier. Laser at 1187 nm will be used as a resonant pump laser source for Ho3+-doped fiber laser. High gain per unit length at 1.2 micron can be achieved in Ho-doped f ...