You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Integrated Sublimator Driven Coldplate for use in Active Thermal Control System

    SBC: Paragon Space Development Corporation            Topic: X205

    The original Sublimator Driven Coldplate (SDC) design sought to provide significant mass savings over a traditional pumped fluid loop by combining the functions of a cold plate and a sublimator and eliminating the fluid loop (Leimkuehler, et. al., "Design of a Sublimator Driven Coldplate Development Unit," 2008-01-2169). The target application was to provide heat rejection for the ascent module of ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  2. Unconditionally Stable Low Dropout Regulators for Extreme Environments

    SBC: SJT Micropower            Topic: X103

    We have developed a low dropout (LDO) regulator using a patented MESFET transistor technology that can be manufactured in commercial CMOS foundries with no changes to the process flow. The regulator is stable under all load conditions without an external compensation capacitor, thereby reducing the mass/volume of the power management system and increasing reliability. The MESFET-based LDO componen ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  3. Low Mass Electromagnetic Plasmoid Thruster with Integrated PPU

    SBC: MSNW, LLC            Topic: S304

    The Electromagnetic Plasmoid Thruster (EMPT) is a revolutionary electric propulsion thruster and power processing (PPU) system that will allow a dramatic decrease in system mass and increase in thrust efficiency over traditional 500-3000 W propulsion systems. The high specific power (>700 W/kg) and high efficiency of EMPT will enable a wide range of deep space missions such as Neptune, Pluto and O ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  4. Multi-Layered Integrated Airframe System

    SBC: Fiber Materials, Inc.            Topic: X902

    This proposed Phase II program builds on the Phase I effort addressing NASA's future mission requirements by: 1) developing higher performing TPS materials capable of meeting the demands of multiple severe mission trajectories; and 2) integrating TPS materials with the sub-structure to improve overall robustness and decrease mass. The program's goal is to extend Phenolic Impregnated Car ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  5. RF Front End Based on MEMS Components for Miniaturized Digital EVA Radio

    SBC: ALPHASENSE, INC.            Topic: O104

    In this SBIR project, AlphaSense, Inc. and the Carnegie Mellon University propose to develop a RF receiver front end based on CMOS-MEMS components for miniaturized digital EVA radio applications. In Phase I, we have proven the feasibility of implementing a compact, low power and high performance S band receiver front end based on CMOS- MEMS components. Specifically, we conducted link budget analys ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  6. Phenolic Impregnated Carbon Ablator (PICA) Gap Filler for Heat Shield Assemblies

    SBC: Fiber Materials, Inc.            Topic: X901

    During this program, Fiber Materials, Inc. (FMI) will develop practical methods for preparing Phenolic Impregnated Carbon Ablator (PICA) materials for joining thermal protection system segments and penetrations of the heat shield assembly. Current and future mission flight environments and designs, such as those for Mars Science Laboratory Aeroshell (MSLA) and anticipated for New Frontiers and Mar ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  7. On-Line Flutter Prediction Tool for Wind Tunnel Flutter Testing using Parameter Varying Estimation Methodology

    SBC: Zona Technology, Inc            Topic: A204

    ZONA Technology, Inc. (ZONA) proposes to develop an on-line flutter prediction tool using the parameter varying estimation (PVE) methodology, called the PVE Toolbox, to ensure the flight safety during the flight flutter test and to prevent the damage to the wind tunnel hardware from the structural failure of the flutter model during wind tunnel flutter test. This tool can be applied to rapidly ide ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  8. Flight Dynamic Simulation with Nonlinear Aeroelastic Interaction using the ROM-ROM Procedure

    SBC: Zona Technology, Inc            Topic: A207

    ZONA Technology, Inc. proposes to develop an integrated flight dynamics simulation capability with nonlinear aeroelastic interactions by combining a flight dynamics model and an add-on nonlinear aeroelastic solver in a Simulink environment. This nonlinear aeroelastic solver is generated by interacting a nonlinear structural Reduced Order Model (ROM) with a Neural-Network-based (NN-based) aerodyna ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  9. Cost Competitive Wave Energy Without Moving Parts

    SBC: Oscilla Power, Inc.            Topic: 815

    Oscilla Power, Inc. (OPI) is developing a utility-scale wave energy harvester that is enabled by low cost and readily-available magnetostrictive alloys. T his device, which utilizes no moving parts, has the potential to deliver predictable quantities of electric power to coastal utilities, industrial users, and remote facilities at costs competitive with coal or gas. The Phase I project demonstra ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  10. Development of Native Kelp Culture System Technologies to Support Sea Vegetable Aquaculture in New England Coastal Waters

    SBC: OCEAN APPROVED, LLC            Topic: 817

    This Phase II research expands Phase I research on Saccharina latissima and is to design and develop “seed” nursery methodologies for the development of commercial-scale production of juvenile kelp plants including Alaria esculenta and Laminaria digitata. The project objectives include: 1. Isolate and maintain cultures of New England species of Alaria esculenta and laminaria digitata to be use ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
US Flag An Official Website of the United States Government