Award Data

The original Sublimator Driven Coldplate (SDC) design sought to provide significant mass savings over a traditional pumped fluid loop by combining the functions of a cold plate and a sublimator and eliminating the fluid loop (Leimkuehler, et. al., "Design of a Sublimator Driven Coldplate Development Unit," 2008-01-2169). The target application was to provide heat rejection for the ascent module of ...

We have developed a low dropout (LDO) regulator using a patented MESFET transistor technology that can be manufactured in commercial CMOS foundries with no changes to the process flow. The regulator is stable under all load conditions without an external compensation capacitor, thereby reducing the mass/volume of the power management system and increasing reliability. The MESFET-based LDO componen ...

The Electromagnetic Plasmoid Thruster (EMPT) is a revolutionary electric propulsion thruster and power processing (PPU) system that will allow a dramatic decrease in system mass and increase in thrust efficiency over traditional 500-3000 W propulsion systems. The high specific power (>700 W/kg) and high efficiency of EMPT will enable a wide range of deep space missions such as Neptune, Pluto and O ...

This proposed Phase II program builds on the Phase I effort addressing NASA's future mission requirements by: 1) developing higher performing TPS materials capable of meeting the demands of multiple severe mission trajectories; and 2) integrating TPS materials with the sub-structure to improve overall robustness and decrease mass. The program's goal is to extend Phenolic Impregnated Car ...

In this SBIR project, AlphaSense, Inc. and the Carnegie Mellon University propose to develop a RF receiver front end based on CMOS-MEMS components for miniaturized digital EVA radio applications. In Phase I, we have proven the feasibility of implementing a compact, low power and high performance S band receiver front end based on CMOS- MEMS components. Specifically, we conducted link budget analys ...

During this program, Fiber Materials, Inc. (FMI) will develop practical methods for preparing Phenolic Impregnated Carbon Ablator (PICA) materials for joining thermal protection system segments and penetrations of the heat shield assembly. Current and future mission flight environments and designs, such as those for Mars Science Laboratory Aeroshell (MSLA) and anticipated for New Frontiers and Mar ...

We propose an improved cathode based on our novel theory of the role of scandium oxide in enhancing emission in tungsten-impregnated cathodes. Recent results have demonstrated the efficacy of nano-particle scandium oxide, but a detailed theory on the mechanism of operation has been lacking. Our theory explains published data and points to an optimized cathode, which we propose here to build and ...

ZONA Technology, Inc. (ZONA) proposes to develop an on-line flutter prediction tool using the parameter varying estimation (PVE) methodology, called the PVE Toolbox, to ensure the flight safety during the flight flutter test and to prevent the damage to the wind tunnel hardware from the structural failure of the flutter model during wind tunnel flutter test. This tool can be applied to rapidly ide ...

ZONA Technology, Inc. proposes to develop an integrated flight dynamics simulation capability with nonlinear aeroelastic interactions by combining a flight dynamics model and an add-on nonlinear aeroelastic solver in a Simulink environment. This nonlinear aeroelastic solver is generated by interacting a nonlinear structural Reduced Order Model (ROM) with a Neural-Network-based (NN-based) aerodyna ...

Oscilla Power, Inc. (OPI) is developing a utility-scale wave energy harvester that is enabled by low cost and readily-available magnetostrictive alloys. T his device, which utilizes no moving parts, has the potential to deliver predictable quantities of electric power to coastal utilities, industrial users, and remote facilities at costs competitive with coal or gas. The Phase I project demonstra ...