You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Hypersonic Propulsion: Enhancing Robustness in Mid-Scale Scramjets

    SBC: Systima Technologies, Inc.            Topic: AF093182

    ABSTRACT: Systima is proposing a Phase II SBIR program for a Scramjet Cold-Start Gas Generator (SCS-GG). Systima"s concepts combine the advanced injection methods and advanced ignition propellants into a reliable, low weight and volume cold-start solution. During Phase II, Systima will mature its gas generator and injection system designs and demonstration testing to verify the performance chara ...

    SBIR Phase II 2011 Department of DefenseAir Force
  2. Cost Competitive Wave Energy Without Moving Parts

    SBC: Oscilla Power, Inc.            Topic: 815

    Oscilla Power, Inc. (OPI) is developing a utility-scale wave energy harvester that is enabled by low cost and readily-available magnetostrictive alloys. T his device, which utilizes no moving parts, has the potential to deliver predictable quantities of electric power to coastal utilities, industrial users, and remote facilities at costs competitive with coal or gas. The Phase I project demonstra ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Development of Native Kelp Culture System Technologies to Support Sea Vegetable Aquaculture in New England Coastal Waters

    SBC: OCEAN APPROVED, LLC            Topic: 817

    This Phase II research expands Phase I research on Saccharina latissima and is to design and develop “seed” nursery methodologies for the development of commercial-scale production of juvenile kelp plants including Alaria esculenta and Laminaria digitata. The project objectives include: 1. Isolate and maintain cultures of New England species of Alaria esculenta and laminaria digitata to be use ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Natural Adjuvants to Enhance Efficacy of Viral Vaccines for Mariculture

    SBC: ProFishent Inc            Topic: 812

    Marine aquaculture production now exceeds 20 million metric tons annually (FAO 2010) but viral diseases are still a major threat to the expansion of sustainable mariculture systems (National Marine Fisheries Service 2007). Pathogenic viruses continue to devastate many fish and shellfish operations every year (ICES Mariculture Committee 2004, Lightner 2011). To date, vaccines against aquatic anim ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Miniaturized Long-Range Free Space Optical Communication System for Mobile Platforms

    SBC: SEQUOIA TECHNOLOGIES, INC.            Topic: AF071224

    A compact and lightweight stabilized free space optical communication system with Micro Electro-Mechanical Systems (MEMS) - based adaptive optics is proposed. The system's unique optoelectronics architecture provides high output power and signal to noise ratio for ultra-long range high speed communication links. Carbon-fiber composite construction, high torque density precision drive design, and ...

    SBIR Phase II 2008 Department of DefenseAir Force
  6. Energy Deposition to Sculpt Upstream Densities and Control Common Aerovehicle, Strongly Reducing Drag and Ablation

    SBC: Physics, Materials, and Applied Mathematics Research L.L.C.            Topic: AF071266

    A versatile technique will be applied to preferentially reduce drag on different CAV designs, serving as an innovative approach to control effectors. Once air is accelerated by a high speed vehicle, strong drag forces are generated which must be countered by control surfaces. This requires tremendous actuator force and ablation resistance by the surfaces. Our approach will control the distribution ...

    SBIR Phase II 2008 Department of DefenseAir Force
  7. Noise and Artifact Reduction in Computed Tomography (CT) Images

    SBC: JDLL, INC.            Topic: AF05203

    Current high-energy computed tomography (CT) techniques for nondestructive testing (NDT) of solid rocket motors (SRM) and other large industrial objects often produce inferior imagery due to artifacts, impairing detection, identification, and measurement of anomalies. Phase I results verified that these artifacts arise from failure of assumptions implicit in the filtered backprojection algorithm. ...

    SBIR Phase II 2008 Department of DefenseAir Force
  8. High Performance, Compact Capacitors for Pulse Forming Networks

    SBC: SIGMA TECHNOLOGIES INTERNATIONAL GROUP, INC.            Topic: AF071178

    This project addresses the development of a solid state polymer multilayer capacitor composed of thousands of nano-thick dielectric layers and self healing aluminum electrodes. Unlike conventional self supported polymer capacitor films that have limited polymer chemistries and dielectric thickness, the proposed capacitor system makes use of a family of highly cross linked amorphous polymer dielec ...

    SBIR Phase II 2008 Department of DefenseAir Force
  9. High-Power 2 Micron Fiber Lasers

    SBC: ADVALUE TECHNOLOGY LLC            Topic: AF071137

    Thulium doped fiber laser near 2 micron is of great interest because of the potential possibility of combining high efficiency, high output power, and retina safety together. This proposal is for the development of new Tm-doped glass fiber for efficient high power 2ƒnmicron fiber laser capable of generating an output power of up to thousands watts. The doping concentration of the proposed glass f ...

    SBIR Phase II 2008 Department of DefenseAir Force
  10. Space Qualifiable, High-Power, Fiber Coupled Pump Laser

    SBC: nLight Photonics            Topic: AF063003

    Through this research grant nLight Corporation will combine its proven design and production experience in high-reliability, single-emitter, fiber-coupled, laser diode module packaging, with its proven experience in 9XX nm, high-power, wide-stripe, super-high-efficiency-diodes (SHEDs) to produce a space qualifiable, high-power, single-emitter, fiber-coupled, 9XX nm laser diode module. Part of this ...

    SBIR Phase II 2008 Department of DefenseAir Force
US Flag An Official Website of the United States Government