You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. N/A

    SBC: Aculight Corporation            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project addresses the need for a new generation of laser transmitters for differential absorption lidar (DIAL) measurements of water vapor. Phase II will develop a new laser technology for mini-DIAL measurements of water vapor. DIAL transmitter requirements will be achieved using a revolutionary technology that allows diffraction limited perf ...

    SBIR Phase II 2001 National Science Foundation
  2. GALLIUM ARSENIDE ON SILICON FOR MICROELECTRONIC AND OPTOELECTRONIC INTEGRATED CIRCUITS

    SBC: ASTROPOWER, INC.            Topic: N/A

    THE GROWTH OF DEVICE QUALITY, LARGE AREA GAAS EPITAXIAL LAYERS ON SILICON SUBSTRATES IS RECOGNIZED AS AN IMPORTANT TECHNOLOGICAL DEVELOPMENT. THE QUALITY OF HETEROEPITAXIAL LAYERS OF GAAS ON SILICON ARE LIMITED BY GAAS-SI LATTICE MISMATCH AND THERMAL COEFFICIENT MISMATCH. THE DEFECT DENSITY OF THE GAAS EPILAYER IS DIRECTLY RELATED TO THE INTERFACE AREA. OUR LABORATORIES HAVE DEMONSTRATED A VIABLE ...

    SBIR Phase II 1989 National Science Foundation
  3. N/A

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase II 2001 National Science Foundation
  4. DEVELOPMENT OF EXTENDED-THROAT VENTURIMETER FOR ON-LINE MEASUREMENT OF GAS-SOLID FLOW

    SBC: Energy Intl Inc            Topic: N/A

    IN DEVELOPMENT OF COAL-BASED ENERGY SYSTEMS, THERE IS AN ACUTE NEED FOR INSTRUMENTATION CAPABLE OF MEASURING FLOW RATES OF SOLIDS AND GAS IN GAS-SOLID SUSPENSIONS UNDER HIGH TEMPERATURE (UP TO 1700 DEGREE FAHRENHEIT) AND HIGH PRESSURE (UP TO 100 ATM) CONDITIONS. SEVERAL INSTRUMENTATION CONCEPTS HAVE BEEN OR ARE CURRENTLY UNDER STUDY (I.E., SONIC DOPPLER METERS, CORRELATION METERS, CAPACITIVE TRANS ...

    SBIR Phase II 1989 National Science Foundation
  5. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: Modumetal, Inc.            Topic: DLA07001

    The purpose of this SBIR effort is to commercialize an innovative method for the production of Modumetal™ discrete parts. The Phase I effort has demonstrated: (1) The low-cost production of monolithic parts of various scales using a net-shape (additive) manufacturing process, (2) An new production process in which cost and production volume are decoupled, and (3) Significant improvement in pr ...

    SBIR Phase II 2008 Department of DefenseDefense Logistics Agency
  6. N/A

    SBC: NUVOGEN RESEARCH, LLC            Topic: N/A

    N/A

    SBIR Phase II 2001 National Science Foundation
  7. IMPROVEMENT OF IMAGING DETECTORS OF INFRARED, VISIBLE, AND ULTRAVIOLET RADIATION

    SBC: Photometrics Ltd            Topic: N/A

    CHARGE COUPLED DEVICES (CCDS) WITH HIGH SENSITIVITY IN THE BLUE-VISIBLE AND ULTRAVIOLET SPECTRAL REGION ARE REQUIRED FOR MANY PROPOSED INVESTIGATIONS IN ASTRONOMY. THE BEST APPROACH TO IMPROVE CCD SENSITIVITY IN THESE WAVELENGTHS IS THINNED, BACKSIDE ILLUMINATION, BUT SUCH DEVICES ARE NOT CURRENTLY COMMERCIALLY AVAILABLE. COMMERCIAL DEVICES PRODUCED IN THE PAST EXHIBITED PROBLEMS INCLUDING LOW QUA ...

    SBIR Phase II 1989 National Science Foundation
  8. N/A

    SBC: SEQUOIA SCIENTIFIC, INC.            Topic: N/A

    N/A

    SBIR Phase II 2001 National Science Foundation
  9. SBIR Phase II: Optic-On-Eye Virtual Reality Display

    SBC: Innovega Inc.            Topic: PhaseII

    This Small Business Innovation Research (SBIR) Phase II project will extend the development of the contact-lens-enabled virtual reality display system demonstrated in Phase I. A key goal will be to advance the construction of the contact lenses to be ready for commercial market tests and OEM partner evaluations. Although the Phase I devices are fully functional and have validated the analytical pr ...

    SBIR Phase II 2011 National Science Foundation
  10. SBIR Phase II: Development of Subminiature Abrasive-Waterjet Nozzles toward Micromachining

    SBC: OMAX CORP.            Topic: PhaseII

    This Small Business Innovative Research (SBIR) Phase II project aims to develop micro abrasive-waterjet technology for automated machining features between 50 to 100 micrometers. The challenge lies in the development of nozzles with beam diameters less than 100 micrometers. Several issues must be resolved due to the complexity of the supersonic, 3-phase, and microfluidic flow through micro abrasiv ...

    SBIR Phase II 2011 National Science Foundation
US Flag An Official Website of the United States Government