List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Enhanced Oxidative Dehydrogenation of Ethane with Facilitated Transport Membranes for Low Cost Production of Ethylene

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: 17a

    Ethylene demand is expected to increase by 50% domestically and worldwide over the next 5 years with a scramble to increase supply via expansion or grass root facilities. US capacity will remain at about 20% of the world’s supply and exceed 100 BPPY. To meet this challenge, US-DOE has invented a mixed metal oxide catalyst, M1 for the oxidative dehydrogenation of ethane (C2-ODH) to ethylene at hi ...

    SBIR Phase II 2018 Department of Energy
  2. Flux Monitoring on an X-Ray Refractive Diamond Lens

    SBC: Delaware Diamond Knives, Inc            Topic: 05d

    Synchrotron-based science has had a great scientific impact and will continue to have great impact going forward. For high brightness 3rd and 4th generation light sources, errors are almost completely due to distortion in the front-end optics caused by the high heat loads generated by the broadband radiation from the insertion device. Diamond offers a solution because of its low x-ray absorption a ...

    SBIR Phase II 2018 Department of Energy
  3. The Vulcan Advanced Hybrid Manufacturing System

    SBC: Made In Space, Inc.            Topic: H7

    Building on previously funded work by NASA and DARPA, its internal research and development projects, and manufacturing activities occurring on the International Space Station (ISS), Made In Space, Inc. (MIS) is developing the VULCAN system to address NASA’s requirement to produce high-strength, high-precision polymer and metallic components on-orbit with comparable quality to commercially-a ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  4. Industrial Crystallization Facility for Nonlinear Optical Materials

    SBC: Made In Space, Inc.            Topic: H8

    Made In Space, Inc. (MIS) proposes the development, to a critical design level, of an Industrial Crystal Facility (ICF) for microgravity product manufacturing and applied research. The ICF is focused on advanced materials engineering, rather than biomedical research, and expands utilization of the ISS into new product areas not previously investigated. Intended applications include nonlinear optic ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  5. Impact Resistant Composite Structures for Space Suit Applications

    SBC: Composites Automation LLC            Topic: H4

    Composites Automation (CA) proposes to collaborate with the University of Delaware Center for Composite Materials (UD-CCM) and our industry transition partner ILC Dover, to develop innovative material and structure concepts for next generation Space Suit hard composite components. The SBIR goals are develop material systems that survive an impact of 300 J at <0.125” thickness and <1.7 ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  6. Impact-Resistant, Damage-Tolerant Composites with STF Energy Absorbing Layers

    SBC: STF Technologies LLC            Topic: H4

    We propose an innovative hybrid composite material containing shear thickening fluid (STF) Energy Absorbing Layers (SEALs) that provides superior impact protection and novel, self-healing functionality to prevent leakage after impact.  The proposed innovation directly addresses the need for thin, lightweight, impact-resistant composite materials that can be fabricated in complex geometries fo ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  7. Design and Process Development of Thin-Ply Composites

    SBC: Composites Automation LLC            Topic: T12

    Composites Automation LLC (CA), our academic partner University of Delaware – Center for Composite Materials (UD-CCM) are teaming up in this STTR Phase II project to evaluate automated tape placement (ATP) processing of thin-ply composites, including material and process development, creation of a modeling foundation capturing thin-ply placement, test panel fabrication and mechanical perform ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. A Novel Glycosaminoglycan-Based Therapeutic for Chronic Rhinosinusitis

    SBC: GLYCOMIRA, LLC            Topic: NIAID

    PROJECT SUMMARY Chronic rhinosinusitisCRSis one of the most prevalent inflammatory diseases in the U Saffecting up toof the population and substantially diminishing the quality of life and productivity of patientsIn four yearsthe annual U Shealth care expenditure to treat patients with CRS dramatically increased from $ B to $Bof the health care budgetwith a corresponding rise in surgical treatment ...

    SBIR Phase II 2018 Department of Health and Human Services
  9. Enhanced Recovery of Pharmaceutical Solvent driven by EPA Initiative

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: NIEHS

    Summary Enhanced Recovery of Pharmaceutical Solvent driven by EPA InitiativeThe United States Environmental Protection AgencyEPAis establishing new safeguards for hazardous secondary materials with objectives to promote the economicenvironmentaland public health benefits of recycling wasteswith an emphasis on several industrial sectorsincluding the pharmaceutical industryOn averagepharmaceutical m ...

    SBIR Phase II 2018 Department of Health and Human Services
  10. Novel SCD1 inhibitors for treatment of cancer

    SBC: MODULATION THERAPEUTICS, INC.            Topic: 102

    Project Summary Metabolic reprogramming plays a critical role in carcinogenesisin part due its ability to promote immune suppressive properties within tumorsHoweverit is unclear whether inhibition of fatty acid metabolism in tumors affects their immunogenicityHerewe show for the first time that inhibition of stearoyl CoA desaturaseSCDthe rate limiting enzyme involved in fatty acid synthesis conver ...

    STTR Phase II 2018 Department of Health and Human Services

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government