You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Natural Adjuvants to Enhance Efficacy of Viral Vaccines for Mariculture

    SBC: ProFishent Inc            Topic: 812

    Marine aquaculture production now exceeds 20 million metric tons annually (FAO 2010) but viral diseases are still a major threat to the expansion of sustainable mariculture systems (National Marine Fisheries Service 2007). Pathogenic viruses continue to devastate many fish and shellfish operations every year (ICES Mariculture Committee 2004, Lightner 2011). To date, vaccines against aquatic anim ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  2. Physical Modeling for Anomaly Diagnostics and Prognostics

    SBC: RIDGETOP GROUP, INC.            Topic: A112

    Ridgetop developed an innovative, model-driven anomaly diagnostic and fault characterization system for electromechanical actuator (EMA) systems to mitigate catastrophic failures.Ridgetop developed a MIL-STD-1553 bus monitor and a MIL-STD-1553 bus controller that simulates the aircraft data bus, reads the environmental (i.e., altitude) and operational (i.e., response of system) data of a system an ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  3. GPU-Accelerated Sparse Matrix Solvers for Large-Scale Simulations

    SBC: EM PHOTONICS INC            Topic: S601

    At the heart of scientific computing and numerical analysis are linear algebra solvers. In scientific computing, the focus is on the partial differential equations (PDEs) that arise from computational fluid dynamics (CFD), climate modeling, astrophysics, and structural and heat analysis that cannot be solved analytically. Certain problem formulations lead to sparse matrices, in which the majority ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  4. On-Line Flutter Prediction Tool for Wind Tunnel Flutter Testing using Parameter Varying Estimation Methodology

    SBC: Zona Technology, Inc            Topic: A204

    ZONA Technology, Inc. (ZONA) proposes to develop an on-line flutter prediction tool using the parameter varying estimation (PVE) methodology, called the PVE Toolbox, to ensure the flight safety during the flight flutter test and to prevent the damage to the wind tunnel hardware from the structural failure of the flutter model during wind tunnel flutter test. This tool can be applied to rapidly ide ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  5. Novel Active Combustion Control Concept for High-Frequency Modulation of Atomized Fuel Flow

    SBC: JANSEN'S AIRCRAFT SYSTEMS CONTROLS, INC.            Topic: A202

    This proposal by Jansen's Aircraft Systems Controls, Inc. presents an innovative solution for Active Combustion Control.Relative to the state of the art, this concept has the ability to provide frequency modulation (greater than 1000[Hz]) in combination with high amplitude modulation (in excess of 30% flow) and can be adapted to a large range of fuel injector sizes. Existing state-of-the-art ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  6. Embedded Data Acquisition Tools for Rotorcraft Diagnostic Sensors

    SBC: RIDGETOP GROUP, INC.            Topic: A209

    Ridgetop's innovation addresses the need for improved capabilities for detecting wear in the drive gears inside helicopter gearboxes. Rotorcraft drive trains must withstand enormous pressure while operating continuously in extreme temperature and vibration environments. Captive components, such as planetary and spiral bevel gears, see enormous strain but are not accessible to fixed instrument ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  7. High-Speed, Low-Power ADC for Digital Beam Forming (DBF) Systems

    SBC: RIDGETOP GROUP, INC.            Topic: S102

    In Phase 1, Ridgetop Group designed a high-speed, yet low-power silicon germanium (SiGe)-based, analog-to-digital converter (ADC) to be a key element for digital beam forming (DBF) systems that will be used in NASA's future radar applications. The ADC will employ a novel combination of time interleaving, high-speed silicon-germanium BiCMOS technology and low-power techniques, such as the doub ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  8. High Power Room Temperature Terahertz Local Oscillator

    SBC: Desert Beam Technologies, LLC            Topic: S104

    The motivation of the proposed SBIR is to develop, demonstrate and commercialize a compact, low-mass, high output power (1-10 milliwatt), tunable source of CW THz radiation operating at room temperature. The source will be useful both as a narrow band frequency stable sources for driving heterodyne receivers at key frequencies between 1 and 5 THz (1.4, 1.9, 2.7, 4.7 etc..) or for laboratory source ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  9. RF Front End Based on MEMS Components for Miniaturized Digital EVA Radio

    SBC: ALPHASENSE, INC.            Topic: O104

    In this SBIR project, AlphaSense, Inc. and the Carnegie Mellon University propose to develop a RF receiver front end based on CMOS-MEMS components for miniaturized digital EVA radio applications. In Phase I, we have proven the feasibility of implementing a compact, low power and high performance S band receiver front end based on CMOS- MEMS components. Specifically, we conducted link budget analys ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  10. Integrated Sublimator Driven Coldplate for use in Active Thermal Control System

    SBC: Paragon Space Development Corporation            Topic: X205

    The original Sublimator Driven Coldplate (SDC) design sought to provide significant mass savings over a traditional pumped fluid loop by combining the functions of a cold plate and a sublimator and eliminating the fluid loop (Leimkuehler, et. al., "Design of a Sublimator Driven Coldplate Development Unit," 2008-01-2169). The target application was to provide heat rejection for the ascent module of ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government