Award Data

Sponsored by NAVAIR, Accudyne Systems completed a Phase 1 SBIR program, developing an equipment and process concept for cost-effective fabrication of composite rotary wing main rotor blade spars. The CH-53K spar was the study focus. The recommended work cell concept combines automated tape placement, woven fabric placement, and pick and place of 45° parallelograms to layup plies, then debulk and ...

The Air Force is seeking new technology that will provide the means to accurately measure and monitor turbine inlet gas temperature in gas turbine engines, particularly in advanced engines operating at very high temperatures (>3,100 degree F). In Phase I of this program, Advanced Fuel Research, Inc. demonstrated that turbine inlet gas temperature can be determined from non-intrusive measurements ...

In phase I, we have proven the feasibility of using the microwave cavity perturbation technique to detect and quantify DoS in marine aluminum alloys. We implemented an alpha version sensor prototype, characterized and validated its performance using ASTM G67 method. We also identified methods to further enhance the sensor sensitivity, so that DoS in the low (a few mg/cm2) to moderate range can be ...

Thermal barrier coatings have been widely used to provide thermal protection to superalloy components in gas turbine engines. After certain amount of service time, the coating experiences a reduction in thickness by processes such as wear, erosion and foreign/domestic object damage. When the thickness decreases below a critical value, the thermal barrier effect provided by the coating is no longer ...

In this proposal, AlphaSense, Inc. and the Center for Non-destructive Evaluations at Iowa State University detail the development of a compact, low cost handheld sensor for non-destructive material case depth verification. The key innovations of this proposal include the following: a) case depth evaluations based on electromagnetic property measurements, b) a model based alternating current potent ...

In this proposal, Alphasense Inc. and the Institute for MEMS and VLSI technologies at the George Washington University detail the development of compact, low cost MEMS microhotplate sensors for battery offgassing analysis. Key innovations of the proposed sensor include: a) the application of metal oxide coated microhotplates to ensure high sensitivity and stability, b) the application of a bi-laye ...

Under the DARPA sponsored Naval Advanced Amorphous Coating (NAAC) program, a novel, thermal sprayed amorphous metal coating has been developed. Such a coating has demonstrated superior mechanical and corrosion resistance properties. Although the coating is designed to be life-of-ship, the application and operational conditions may compromise the integrity of the coating. For example, the applicati ...

For Phase I, an ultra low power, high performance microprocessor core using a combination of double-gated and independent double-gated Flexfet™ SOI CMOS technology from American Semiconductor will be designed to address the requirements of military and space communication systems. High integration feasibility using Flexfet technologies followed by confirmation of the power and performance improv ...

A rapid assay for the detection of T2 trichothecene mycotoxin in water is proposed that will use ANP Technology, Inc.'s established handheld reader and rapid acetylcholinesterase (AChE) inhibitor test ticket format. Dipain-II and other candidate Dipain derivatives will be immobilized on cellulose and other solid supports mounted as discs in wells on the existing test ticket, similar to the AChE i ...

We propose to adapt angle-only passive ranging methods developed for submarine warfare to the problem of range estimation for missiles using current electro-optical sensor systems in order to provide fire control quality tracking at or near threat burnout to support early intercept. Three methods will be developed: parallax or triangulation ranging; angle rate ranging; and tracker/filter algorith ...