List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Solid Freeform Fabrication of low cost, in situ, metallic foam components for high energy absorption applications

    SBC: Sensintel Inc.            Topic: N/A

    In the phase I program, Advanced Ceramics Research, Inc. (ACR) fabricated in situ metallic foams by using a unique water-soluble polymer blend and ACR's Extrusion Freeform Fabrication (EFF) method. When the green parts were heated for binder burnout, thebinder was found to foam and create uniform closed, high-aspect ratio porosity. The freeform fabrication also could create open porosity ranging f ...

    SBIR Phase II 2001 Department of DefenseArmy
  2. Marine Mammal Detection and Mitigation

    SBC: Sensintel Inc.            Topic: N/A

    This program will utilize the Swarm concept of very low cost expendable UAV's out fitted with IR and optical cameras to continuously detect marine mammals near or on the surface in the proximity of Navy ships. ACR will team with IIT Research Institute ofLanham, MD for sensor technology and development. Phase I will demonstrate functionality of key systems, develop and integrated system design, a ...

    STTR Phase I 2001 Department of DefenseNavy
  3. Multifunctional Composite Structures

    SBC: Sensintel Inc.            Topic: N/A

    Military and commercial entities desire multifunctional or

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  4. Investigatioin of Diode Lasers for Removal of Large-Area Appliqu¿

    SBC: Sensintel Inc.            Topic: N/A

    Advanced Ceramics Research Inc. (ACR) has recently developed a low-density water-soluble mandrel material composed of a hollow ceramic-microsphere filler bound together with a high thermal stability thermoplastic binder. ACR and its partners propose to usea variation of this product containing high thermal-conductivity powders for a novel low-cost tooling material for polymer composites. Prelimin ...

    SBIR Phase I 2001 Department of DefenseNavy
  5. High toughness rare earth-based Fibrous Monolith Permanent Magnets

    SBC: Sensintel Inc.            Topic: N/A

    In this phase I STTR program, Advanced Ceramics Research, Inc. (ACR) and the University of Delaware (UD) propose the development of an innovative process for high energy product rare earth-based permanent magnets with improved toughness based on ACR'spatented Fibrous Monolith (FM) and the UD's Automated Tow Placement (ATP) processes. The novel combination of high-toughness NdFeB-based FM material ...

    STTR Phase I 2001 Department of DefenseNavy
  6. Low Cost Ceramic-Lined Rocket Motor Case Design

    SBC: Sensintel Inc.            Topic: N/A

    In this phase I SBIR program, a team led by Advanced Ceramics Research, Inc. (ACR), and its partners propose the development of an innovative integral co-cured rocket motor casing comprised of a graphite/epoxy shell with a novel heat shield and linerfabricated from ACR's patented gelcasting ceramic material. The novel combination of materials will provide a unique synergy where the graphite/epoxy ...

    SBIR Phase I 2001 Department of DefenseAir Force
  7. Novel Rapid Prototyping Technique for the Fabrication of Structural Components

    SBC: Sensintel Inc.            Topic: N/A

    Advanced ceramics research (ACR), has developed a simple, highly promising thruster fabrication method utilizing novel gel casting and injection molding techniques. These methods will be used for the creation of low-cost thrusters and nozzles. Thefollowing proposal details a synergistic combination of the two technologies to create a thermal protection system concept that is low-cost and innovativ ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  8. Novel Low CTE Composite Materials for Propulsion Applications

    SBC: Sensintel Inc.            Topic: N/A

    Advanced Ceramics Research, Inc. (ACR) proposes to develop novel composite systems for thermal management in propulsion applications. Traditionally, phenolic-based materials are used as insulators because of their low thermal conductivity and low cost.Unfortunately, insulating nozzle and thruster liners composed of these materials suffer from short lifetimes as a result of pyrolysis at elevated t ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  9. Phase-locked Fiber Lasr Array

    SBC: ADVR, Inc            Topic: N/A

    The purpose of this Phase II effort is to build a rugged, compact optical phased array for coherent addition of laser beams, a crucial building block for multi-kilowatt continuous wave laser devices. This effort builds on the success of the Phase I effortwhere it was shown that an array of electro-optic waveguides in Potassium Titanyl Phosphate (KTP) could be used for phase control. The low-voltag ...

    SBIR Phase I 2001 Department of DefenseAir Force
  10. Phase-locked Fiber Lasr Array

    SBC: ADVR, Inc            Topic: N/A

    The purpose of this Phase II effort is to build a rugged, compact optical phased array for coherent addition of laser beams, a crucial building block for multi-kilowatt continuous wave laser devices. This effort builds on the success of the Phase I effortwhere it was shown that an array of electro-optic waveguides in Potassium Titanyl Phosphate (KTP) could be used for phase control. The low-voltag ...

    SBIR Phase II 2001 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government