List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. On-Chip Optical Interconnector

    SBC: ADIANT TECHNOLOGY, INC.            Topic: N/A

    The objective of this proposed SBIR phase I work is to design, build and therefore demonstrate the feasibility of an on-chip optical interconnector. This proposed device contains a molded plastic optical connector, a fiber ribbon, an on-chip opticalreceptacle, VCSEL, PIN diode (arrays for multiple-channel applications), and necessary electronic circuits, all in one compact unit. The design targets ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  2. Design and Fabrication of Low-cost composite tooling materials

    SBC: Sensintel Inc.            Topic: N/A

    The purpose of this phase II SBIR effort is to further develop, optimize and commercialize the low-cost, innovative combination of the R&D 100 award winning water-soluble and non-water soluble tooling materials developed by Advanced Ceramics Research, Inc.(ACR) for the fabrication of polymer matrix composites. Specifically, the objectives of the phase II effort are to develop a tooling material co ...

    SBIR Phase II 2003 Department of DefenseNavy
  3. Real-time Multimedia Communications in Highly Mobile Networks.

    SBC: Sensintel Inc.            Topic: N/A

    Based on the success demonstrated in the Phase I programs, this Phase II program will transition AINS technology developed in the universities into various compelling demonstrations that demonstrate the robust advantages of AINS. In the four Phase Iprograms we were able to perform significant initial AINS technology

    STTR Phase II 2003 Department of DefenseNavy
  4. Multi-functional nanocomposite materials with high-temperature polymer resin matrice

    SBC: Sensintel Inc.            Topic: N/A

    Composites that are reinforced with well-dispersed carbon nanotubes have been shown to improve the performance of polymers in many areas such as stiffness, heat distortion temperature, control of thermal coefficient of expansion, and corrosion resistancein extreme environments. However, much of the nanocomposite related research and development has not been directly relevant to carbon fiber reinfo ...

    STTR Phase I 2003 Department of DefenseAir Force
  5. Advanced Nozzle Materials and Concepts for High Mass Flux Boost Motors

    SBC: Sensintel Inc.            Topic: N/A

    On this Phase I program, Advanced Ceramics Research Inc. (ACR) will develop and commercialize technology to fabricate boost motor nozzles using TaC-based Fibrous Monolith composites. These materials may also have application for other high temperaturepropulsion-related composite components such as gas divert tubes, valves, and hot gas ducts. On the commercial side, ACR is exploring and evaluatin ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  6. Lightweight Integrated Ceramic Nozzle Concept for Propulsion

    SBC: Sensintel Inc.            Topic: N/A

    Advanced Ceramics Research Inc. (ACR), has developed a simple, low cost composite fabrication method utilizing our patented composite fabrication and gel-casting technologies. Test samples and components will be fabricated by first mixing the gel castingslurry containing ceramic powder and fibers, casting this slurry into a near net shape mold, then firing of the green material into a finished par ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  7. Ballistic Missile System Innovative Propulsion Products

    SBC: Sensintel Inc.            Topic: N/A

    Advanced Ceramics Research, Inc. (ACR) proposes to develop a process to fabricate propulsion components that exhibit improved thermo-mechanical properties when compared to the materials currently in use. This effort combines Isotropic ParticulateComposite (IPC) technology, an offshoot of our Fibrous Monolith (FM) composite processing, and gel casting expertise to develop a new generation of low-c ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  8. Small, Heavy Fuel, Compression Ignition Small UAV Engines

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this proposed DARPA SBIR project is to design, build and test a high efficiency 2 cycle ceramic/polymer engine that will run on JP-8 fuel with a self-contained onboard starter generator. The engine system will ncorporate a ceramic piston,cylinder, and head with lightweight polymer engine casing. The use of high wear thermally insulating ceramics will greatly eliminate the need for lu ...

    SBIR Phase I 2003 Department of DefenseDefense Advanced Research Projects Agency
  9. Fiber reinforced ceramic radomes for next generation missiles

    SBC: Sensintel Inc.            Topic: N/A

    In this phase I SBIR program, Advanced Ceramics Research, Inc. (ACR) proposes the development of low cost non-aqueous ceramic gelcasting slurries for radome applications in advanced tactical missiles. The proposed ceramic materials will have the improvedstrength, toughness and thermal shock capabilities required for this application. Additionally, they have been shown to possess a low and thermal ...

    SBIR Phase I 2003 Department of DefenseNavy
  10. A novel micro-channel heat exchanger for high heat flux electronics

    SBC: Sensintel Inc.            Topic: N/A

    In this Phase I STTR program, a team consisting of Advanced Ceramics Research Inc. (ACR) and the University of Arizona (UA) propose to develop and optimize a novel, low-cost, integrated micro-channel heat exchanger system for high power electronicapplications. In radar and other applications involving power electronics, thermal dissipation from the electronics approach levels as high as 1000 W/cm ...

    STTR Phase I 2003 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government