You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Miniature Actuating Guided Nozzle Mechanism

    SBC: Florida Turbine Technologies Inc.            Topic: MDA12022

    FTT has designed, built, and tested a prototype of their Miniature Actuating Guided Nozzle Mechanism (MAGNM) for use with DACS thrusters. FTT"s MAGNM is a passive nozzle extension that surrounds the DACS thruster on a guide tube. When ready to deploy the nozzle extension, inert gas or propellant pressurizes the main combustion chamber and that pressure acts on a pressure cap located on the end o ...

    SBIR Phase I 2013 Department of DefenseMissile Defense Agency
  2. High Power Density, High Efficiency, Scalable Pulse Power Delivery System


    With the advent of pulse energy weapons, the transient characteristics of military aircraft power systems is changing. These new loads require power supplies that shield the pulse transient from the electrical distribution system, while also being highly efficient, power dense, and reliable. Mainstream proposes a lightweight, modular, hybrid pulse energy delivery system that is scalable to applica ...

    SBIR Phase I 2013 Department of DefenseNavy
  3. Development of Materials for Metallic Direct Digital Manufacturing

    SBC: Keystone Synergistic Enterprises, LLC            Topic: N122123

    Metallic Direct Digital Manufacturing (MDDM), is based on layer-by-layer metal deposition and has been developed to a sufficient state of manufacturing readiness where production applications have emerged in niche industrial sectors. DDM processes in general require the use of raw materials that are either powdered metal or weld wire, both sources having been developed long before DDM processes em ...

    SBIR Phase I 2013 Department of DefenseNavy
  4. Direct Digital Fabrication and Characterization of New Low Cost Titanium Alloys

    SBC: ATS-MER, LLC            Topic: N122123

    In this Phase I program, MER will work with Prof. James Williams of Ohio State University (OSU) to identify and fabricate new titanium alloys of interest to the Navy. The alloys will be fabricated using a low cost DDM process in place at MER which utilizes a plasma transferred arc welding torch as the heat source. The mechanical properties and microstructure of these new alloys will be characteriz ...

    SBIR Phase I 2013 Department of DefenseNavy
  5. Development of an Active Electronics Enclosure Thermal Management System


    As shipboard control electronics continue to evolve, electronic systems inevitably incur hardware changes. However, these system changes often require sound recertification of the electronics enclosure, which can be a very costly and time-consuming process. Therefore, it is desirable to build a silent electronics enclosure to avoid the recertification process. Mainstream proposes developing an act ...

    SBIR Phase I 2013 Department of DefenseNavy
  6. PETE Portable EEG Tool for Education

    SBC: Design Interactive, Inc            Topic: SB131002

    Current EEG technology is restricted to traditional research or clinical venues due to the technical expertise required for use and interpretation of data and the high cost of available systems. Previous attempts at developing low cost systems have resulted in unreliable data output. There is a need to develop portable, easy to use and inexpensive EEG technology that would stream neural data dir ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  7. Deployable Multi-Band Radio Base Station

    SBC: KINETX, INC.            Topic: N122148

    This offer proposes a set of activities to provide an innovative Deployable WCDMA Multi-Band Radio Base Station. The effort entails investigation, trade studies, and architecture design to support an easily fielded, transportable WCDMA Base Station not typical of mainstream communication deployments. The derived solution will support both military and commercial applications where terrestrial or s ...

    SBIR Phase I 2013 Department of DefenseNavy
  8. Non-Mechanically Moving Solar Directing System for Photovoltaic Modules

    SBC: TIPD, LLC            Topic: N131019

    A key focus of the United States government"s energy policy is to develop technologies that will allow the country to reduce Green House Gases by 80% by 2050. In support of this effort, the US Secretary of the Navy has developed a set of energy goals which include producing at least 50% of shore-based energy requirements using alternative sources primarily solar power. One of the largest ongoing e ...

    SBIR Phase I 2013 Department of DefenseNavy
  9. High Energy and Power Density Electrical Energy Storage Device


    Energy storage is an issue for high energy and high power applications. Batteries typically offer high energy densities with low power densities. For capacitors, the energy to power ratio is reversed. Therefore, capacitors have been limited to pulsed power applications that require high charging/discharging rates. Conventional ultra capacitors used in power applications are based on liquid electro ...

    SBIR Phase I 2013 Department of DefenseNavy
  10. Affordable Reinforced Polymer Composite Structures with embedded electrical interfaces

    SBC: Taylor & Lego Holdings, LLC / Rapid Composites            Topic: MDA12025

    This proposal details inventive ways for developing affordable reinforced polymer structures with embedded electrical interfaces. Recent developments in the use of advanced composites for rapidly fabricating cylindrical missile shells have shown that it is possible to incorporate complex circuitry into the missile skins. Illustrations are provided that demonstrate significant increases in the stre ...

    SBIR Phase I 2013 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government