List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. "Night Glow" Short Wave Infrared LED (NSLED) Image Projector Development

    SBC: Chip Design Systems            Topic: AF131098

    ABSTRACT:We propose to develop and demonstrate component technologies, interfaces, and software necessary to build a prototype Short Wave Infrared (SWIR) projection system with high dynamic range and fast frame rates. More specifically, final hardware deliverables for this project include three (3) tested hybrid modules that integrate a 1024x1024 24-micron pitch SWIR LED emitter array with a match ...

    SBIR Phase II 2014 Department of DefenseAir Force
  2. (RAPID) Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions with a Clear Air Force Stakeholder Need

    SBC: Privoro LLC            Topic: AF183005

    Smartphones and other mobile devices are becoming Air Force users primary digital tool, overtaking computers and desk phones as their go-to devices. However, these commercial devices, which are carried with users everywhere, are susceptible to being comprised by overreaching applications and bad actors.Privoros SafeCase platform, commercially available since November 2018, an independent of the sm ...

    SBIR Phase II 2019 Department of DefenseAir Force
  3. 1kW Diesel Burning Man Portable Hybrid Electric Power System using Catalytic Fuel Ignition Technology

    SBC: Automotive Resources, Inc.            Topic: N/A

    "The Army has indicated significant need for lightweight, heavy fuel engines for use in a wide variety of battlefield missions. The Catalytic Ignition System (SmartPlugTM) developed and patented by Automotive Resources, Inc. (ARI) promises to fulfill theArmy's "One Fuel Forward" requirement without the need for replacing the gasoline engine with a new engine design. ARI had demonstrated the abilit ...

    SBIR Phase II 2002 Department of DefenseArmy
  4. 2-D Ultrasound Scanning Probes for 3-D Medical Diagnostic Imaging

    SBC: Guided Therapy Systems, Inc.            Topic: N/A

    The primary objective of this proposal is twofold. The first is to investigate theoretically and experimentally acoustic, electrical, and geometric parameters of 1.5-D ultrasound transducer array. The modeling and simulations of the arrays of various geometry, center frequencies, and acoustic materials will be performed, analyzed and optimized. The optimization criteria will be the best achieva ...

    SBIR Phase II 1997 Department of DefenseDefense Advanced Research Projects Agency
  5. 24/7 Monitoring of Active Satellites using Passive Radio-Frequency (RF) Sensors

    SBC: Rincon Research Corporation            Topic: AF171026

    Rincon Research Corporation (RRC) has developed a low-cost passive-RF-based system that generates high-accuracy tracking observations using the RF signals broadcast by active satellites. In Phase I, RRC demonstrated that this system can track active deep-space satellites 24x7 in all weather, that it can distinguish closely spaced objects (CSOs) by their different RF emissions, and that the resulti ...

    SBIR Phase II 2019 Department of DefenseAir Force
  6. 28GHz-43GHz Nadir/Near-Nadir (~70-90 degrees wrt horizontal) Low Probability of Intercept Radio Frequency Direction Finding/GeoLocation Capability

    SBC: SPECTRUM MAGNETICS LLC            Topic: N102118

    In this program, we propose a radio frequency (RF) direction finding sensor for low probability of intercept (LPI) RF radar system. This sensor consists of a dielectric lenses focusing system and an innovative focus plane detector array (FPDA) developed by Spectrum Magnetics, LLC (SM). The focusing system project the RF signal onto its focus plane. A novel FPDA based on emerging spintronic and met ...

    SBIR Phase II 2012 Department of DefenseNavy
  7. 3D Visualization for Serpentine Robotic Systems

    SBC: LITE CYCLES, INC.            Topic: SB062023

    During the program baseline, LCI will develop an eyesafe, large array RT3D camera system that generates both 3D and 2D grayscale imagery in real-time that can be mounted on the iRobot PackBot. The 3D and 2D grayscale imagery can be fused in software to display both range and albedo information for each pixel in the 3D image, a display that will provide better scene understanding. During the option ...

    SBIR Phase II 2008 Department of DefenseDefense Advanced Research Projects Agency
  8. A Compact Lightweight Infrared Imaging Interferometer for Space-Based Platforms

    SBC: Hart Scientific Consulting International LLC            Topic: AF131071

    ABSTRACT: Research Objectives: 1) Quantify the size, weight, power consumption and cost of flight units of the Space-based InfraRed Imaging Interferometer (SIRII) sensor. 2) Quantify the fundamental advantages of the interferometric approach in comparison to conventional sensor design. 3) Quantify the impact of disadvantages of the interferometer. 4) Establish the steps required to mature the des ...

    SBIR Phase II 2014 Department of DefenseAir Force
  9. A Compact, Low Cost, Handheld Sensor for Non- Destructive Material Case Depth Verification

    SBC: ALPHASENSE, INC.            Topic: N102141

    In this SBIR program, AlphaSense, Inc. teamed with the Center for Non-destructive Evaluations at Iowa State University to develop a compact, low cost handheld sensor for non-destructive material case depth verification. In phase I, we have proven the feasibility of using an alternating current potential drop (ACPD) sensor for non-destructive measurements of case depth. Phase II will be focusing on ...

    SBIR Phase II 2012 Department of DefenseNavy
  10. A Continuous Reactor for the Large Scale Production of Nanotubes

    SBC: ATS-MER, LLC            Topic: N/A

    "The Phase I effort made significant headway in the understanding of the catalytic formation mechanism of carbon nanotubes (CNT's). Armed with this knowledge a systematic evaluation of potential processes for large-scale CNT production was undertaken. Theevaluation of arc, hot plasma, catalytic chemical vapor deposition (CCVD), and several production approaches determined that CCVD approach hold ...

    SBIR Phase II 2002 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government